Am I at risk of destroying my system ?
I am planning an active system using mono "QUDOS" modified Naim 110's with Les' minicaps.
My system will require 3 mono 110's for each channel and an active crossover for each channel.
Looking at what you have done with 3 power outlets, could I run 4 power outlets off it ?
(i.e. for 3x "110s" and 1x active crossover)
If so then 2 boards will suffice for each channel, the other option is to get 4 DC blocking boards and put 2 in each case and run 2 power outputs off each board.
Thanks in advance for any advice