Disarmamant
Certified foo free
I had an arm board made from the drawing supplied by Acoustic in Germany but there is no way I can align it all ok. Given up at the moment and fitted a new SME V. Will try the Graham again later. Does any one know where I can get a Palmer alignment gauge?
No such thing as a Palmer alignment gauge AFAIK. Do you have the alignment protractor for the Graham?
The Palmer armboard is a single screw fixing so, if yours is correctly made, you should be able to rotate the armboard about the fixing point until you have the correct pivot to spindle distance for the Graham. Once you have that set and fixed in position it should be possible to correctly align the cartridge using the Graham alignment protractor without moving the armboard.
Last edited: