sq225917
Bit of this, bit of that
Andrew, I have to say that 5k is an awful lot for a simple tool.
Who said Andrew was simple... ;-)
Andrew, I have to say that 5k is an awful lot for a simple tool.
Who said Andrew was simple... ;-)
Come on with the pictures already... ;-]
There isn't a lot to see - if you already own any Naim half-width cases, just look at one of those - cos these look absolutely identical
Oh will I - excellent - should I arrange to be in then?
When are the trays ready?
via pictures.
Some pics.
f**k me these are hard to photo! Every fingerprint shows up. I spent more time cleaning than I did photographing (not really but it felt like it). If you think you see a belmish you don't, its just the light!!!
Its been a really, really long road with days and days of work involved, not to mention the cost. But at last here is an exact replica of the NAIM Shoebox case for 276mm depth equipment.
for god sake man get on with it!
As far as the trays are concerned it would help me if you can sort out a technique for getting the best results.
You could easily produce some good templates for helping customers to mark out the front and back plates. This would improve confidence in your customers that they are likely to be successful in a diy project. The same could be applied to the bases for different uses such as hicap preamps and power amplifiers.
Andrew.
Well, hat's off to you, it looks perfect
All you'll need then are the olive fascia's
Regards
John R