advertisement


NCC200 V1.4/Cap6 GB

There are two things to consider with LS protection. One is the quality of the relay as Alan has already said and the other is if the LS protection circuitry has any effect on sound quality when connected to your amp. When I get some free time I'd like to try my Voyagers with and without the LS protection.
 
OK

Let’s get this show on the road.

Anyone living outside of the EU (OZ, NZ, JAVA, USA) please check you PM inboxes for payment details.

When an invoice is sent I’ll place an I next to their names.

PLEASE TAG YOUR PFM NAME TO YOUR PAYMENTS.:cool:

I’LL Start a new list here and move it along the thread to keep things simple.

1) Chiily 2 x NCC200 and parts 2 x U heatsinks.I

2) Spider 2 X NCC200 and parts X 2x Cap6 boards 2 x u heatsinks I

9) Doinker 2 x NCC200 1X cap6 I

10) S-man 2 x NCC200 boards and parts 2 x U heatsinks. I

19) Mirkov 6 x NCC boards and bits 6 x U heat sinks 4x cap6 I

21) Naim2 6 x NCC200 board plus parts. . 6 x U shaped heat sinks 6 x Cap6 Boards. I

25) reefhead 2x parts only, 2 x U shaped heat sinks I

28) Skak5770 2 x NCC200 board and parts 2 x Large U shaped heat sinks 4 x Cap6 Boards. I

29) Solar 2 x NCC200 PCB with parts 2 x Large u shaped heat sinks I

34) Muz 10 NCC200 cap6? I

Anyone not on the above list please supply your postage details.

As I receive payment I’ll move people into the PAID section below.

4) BarryM 4 x NCC200 and parts 4 x Cap6 4 x U heatsinks

5) Marra 4 x Cap6

6) Gaz25 4 x Cap6

7) Mark1212 2 x NCC boards and parts 2 x Cap6

8) GWM 2 NCC boards plus parts

11) Grahamdocman 6x NCC200 and parts 6 x Cap6 boards 6x U heatsinks

13) Mark65 2 x NCC200 plus parts, 2X NCC200 bare boards 4 X U heatsinks, 6 x Cap6 Boards

14) Cubastreet 2 X NCC200 boards, 2X Cap6

15) Alan 6 x NCC200 boards + driver heat sinks 6 x Cap6 Boards

16) 2 Dive 4xNCC200 10 x Cap6 4 x U shaped heatsinks

17) Harthold 2 x NCC200 and parts 2 x U heat sinks 2 x cap6 boards

18) Meirkat 2 x NCC200 and parts 2 x Cap6 Boards 2x Large U shaped heat sinks with fixing kits for the OP transistors

20) Flashgo 4x NCC200 plus parts 4x U heatsinks 6 X Cap6

22) Kdistin 2 x NCC200 boards only 2 x cap 6.

23) Grazie 2x NCC200 plus parts 2 x Cap6 boards

24) Klaus dee 2 x NCC200 board and parts,2x U shaped heat sinks 2 x cap6 boards

27) Keithtwine 2 x ncc200 and 2 x cap6 boards

35) ElectronJunkie 4x NCC200 plus parts 2x NCC200 Bare PCB only 4x Large TO3 heatsink with insulators, mica pads, stainless fixings 4x Cap6 PCB with drilled and black anodised heatsink. insulators and stainless fixings,

26) sonus 2x NCC200 board and parts 2x NCC200 boards only 4x Large U shaped heat sinks.

30) Moleman 2 x NCC200 PCB with parts

31) DubbLin 2x NCC200 PCB plus parts

32) Claytronics 2x NCC200 V1.4 boards only. 2 X Cap6 Boards

33) Boxmaster 12 NCC200 boards without the extras

36) econorm 2 x NCC200 1.4 board and small driver heat sinks. 2x Large U shaped heat sinks with fixing kits for the OP transistors.2 x Cap6 Boards.

37) Jirka 2 x NCC200 boards plus parts. 2 x large U shaped heat sinks 2 x cap6 boards

Hope that makes sense
 
Ok

ready to start rolling out the invoices for UK residents.

if you look at the list you'll find a number next to you PFM handle.

No's 1-4-9-15 and 16 please check your PM box:cool:
 
Shaun,

sorry for the late response. Was away from the I-net for some days. Just sent the money via PP.

Cheers,

Klaus
 
Hi Klaus

Don’t worry its fine. :cool:

I’ve tried to implement the invoices to allow for such things.

Cash received with thanks.
 
And the last of the invoices are out.

No’s 2, 10, 25, 28, 29 and 34 please check your PM box’s.


Anyone who has not received an invoice please contact me ASAP.
 
Colin Barron said:
Hi Alan you may be correct but if Les fitted them i assumed he had compared quality and found them ok, and at about £15 i was convinced. I would be interested if anyone has compared voyagers with and without.
Click to expand...

My original NCC build of many years ago was without output protection I did manage to blow a test speaker with them,fitted the Valmans after seeing Les use them and could tell no difference, by the way the boards also eliminate switch on thump important for active tweeter duties.
 
''by the way the boards also eliminate switch on thump important for active tweeter duties.''

Another good reason to use them:)
 
OK

Let’s get this show on the road.

Late entries

digestive 2 ncc200 boards parts and heatsinks and 2 cap 6 boards


Anyone living outside of the EU (OZ, NZ, JAVA, USA) please check you PM inboxes for payment details.

When an invoice is sent I’ll place an I next to their names.

PLEASE TAG YOUR PFM NAME TO YOUR PAYMENTS.

I’LL Start a new list here and move it along the thread to keep things simple.

1) Chiily 2 x NCC200 and parts 2 x U heatsinks.I

2) Spider 2 X NCC200 and parts X 2x Cap6 boards 2 x u heatsinks I

9) Doinker 2 x NCC200 1X cap6 I

19) Mirkov 6 x NCC boards and bits 6 x U heat sinks 4x cap6 I

21) Naim2 6 x NCC200 board plus parts. . 6 x U shaped heat sinks 6 x Cap6 Boards. I

28) Skak5770 2 x NCC200 board and parts 2 x Large U shaped heat sinks 4 x Cap6 Boards. I

34) Muz 10 NCC200 cap6? I

Anyone not on the above list please supply your postage details.

As I receive payment I’ll move people into the PAID section below.

4) BarryM 4 x NCC200 and parts 4 x Cap6 4 x U heatsinks

5) Marra 4 x Cap6

6) Gaz25 4 x Cap6

7) Mark1212 2 x NCC boards and parts 2 x Cap6

8) GWM 2 NCC boards plus parts

10) S-man 2 x NCC200 boards and parts 2 x U heatsinks.

11) Grahamdocman 6x NCC200 and parts 6 x Cap6 boards 6x U heatsinks

13) Mark65 2 x NCC200 plus parts, 2X NCC200 bare boards 4 X U heatsinks, 6 x Cap6 Boards

14) Cubastreet 2 X NCC200 boards, 2X Cap6

15) Alan 6 x NCC200 boards + driver heat sinks 6 x Cap6 Boards

16) 2 Dive 4xNCC200 10 x Cap6 4 x U shaped heatsinks

17) Harthold 2 x NCC200 and parts 2 x U heat sinks 2 x cap6 boards

18) Meirkat 2 x NCC200 and parts 2 x Cap6 Boards 2x Large U shaped heat sinks with fixing kits for the OP transistors

20) Flashgo 4x NCC200 plus parts 4x U heatsinks 6 X Cap6

22) Kdistin 2 x NCC200 boards only 2 x cap 6.

23) Grazie 2x NCC200 plus parts 2 x Cap6 boards

24) Klaus dee 2 x NCC200 board and parts,2x U shaped heat sinks 2 x cap6 boards

25) reefhead 2x parts only, 2 x U shaped heat sinks

27) Keithtwine 2 x ncc200 and 2 x cap6 boards

35) ElectronJunkie 4x NCC200 plus parts 2x NCC200 Bare PCB only 4x Large TO3 heatsink with insulators, mica pads, stainless fixings 4x Cap6 PCB with drilled and black anodised heatsink. insulators and stainless fixings,

26) sonus 2x NCC200 board and parts 2x NCC200 boards only 4x Large U shaped heat sinks.

29) Solar 2 x NCC200 PCB with parts 2 x Large u shaped heat sinks

30) Moleman 2 x NCC200 PCB with parts

31) DubbLin 2x NCC200 PCB plus parts

32) Claytronics 2x NCC200 V1.4 boards only. 2 X Cap6 Boards

33) Boxmaster 12 NCC200 boards without the extras

36) econorm 2 x NCC200 1.4 board and small driver heat sinks. 2x Large U shaped heat sinks with fixing kits for the OP transistors.2 x Cap6 Boards.

37) Jirka 2 x NCC200 boards plus parts. 2 x large U shaped heat sinks 2 x cap6 boards

38) torstoi 6x NCC200 + parts, 6x U shaped heat sinks with fixing kit, & 6 x Cap6 boards,

39) Simey 2 x ncc200 boards parts and 2 x heatsinks and 4 x cap 6 boards

Hope that makes sense
 
Is it too late to be added to the list? was hoping for 2 ncc200 boards parts and heatsinks and 2 cap 6 boards, Many apologies if I am too late!

Many Thanks
Simon
 
Not to Late

Simey I've added you to the list. Please PM me your address and postage requirements.

Caddy359 Please PM me your boards/parts wants, address details and postage requirements.

You are both very welcome.:cool:
 
Very happy to have found this thread, Big thanks to Les and Shoom for making this possible, and thanks for adding me at such a late stage
 
Hi shoom,
if it is still possible, I would like

6x NCC200 + parts, 6x U shaped heat sinks with fixing kit, & 12x Cap6 boards, please.

Thank you ! :)
 
Welcome aboard Simey (please check your PM box) and torstoi.:cool:

I hope you both enjoy the ride.:D
 
Thank you very much, shoom..I'm sure I will.. :)

I have answered your pm & depending if I got you right, will change my order a bit.

Thanks again !
 
same as Simey

Is it too late to be added to the list? was hoping for 2 ncc200 boards parts and heatsinks and 2 cap 6 boards

Thanks
 
You must log in or register to reply here.


advertisement


Back
Top