Yes it works via streamer when receiving music upsampled to native DSD512 from RoonDoes DSD512 work via streaming? I tested awhile back from local play - USB Bus Bandwidth will be pushed... But it be good news if we can stream DSD512 over LAN.
Yes it works via streamer when receiving music upsampled to native DSD512 from RoonDoes DSD512 work via streaming? I tested awhile back from local play - USB Bus Bandwidth will be pushed... But it be good news if we can stream DSD512 over LAN.
New production streamers will ship with 16GB memory.
Sam,
We should have confirmed pricing on the Detox chassis in the next couple of weeks - we will request payment for the chassis, and once they arrive in Europe we will move to electronics production.
No it is not a SD card, but eMMC memory. You can see that John planned for this option from the start. Just look at any early picture of the Streamer.Hi John,
Will this be a CM3 Lite with eMMC on the streamer board or an SD card? What will the remaining beta units ship with?
Great news, John. Will be nice if DETOX ships with the next couple of months!
Please refresh my memory...
Will the DETOX have two USB ports so that a double-headed (1 power, 1 data) cable can be used?
John/Others: how easy is it to recap a (L2) MDAC with faulty caps? Due to the delays with MDAC2, I figured that I might try to repair my MDAC myself. I know the PSU caps and a fair number of those on the main DAC board had bulged, so my plan would be to get good quality replacements (recommendations welcome) and carefully replace them to bring it back to life. The alternative is for it to remain faulty, so there’s little to be lost in trying (provided I take care).
Hi John,
Will this be a CM3 Lite with eMMC on the streamer board or an SD card? What will the remaining beta units ship with?
Has any work been done on the phono stage that people contributed £100 towards?
Great not bad for the little streamer Guess the greater speed is a by-product of the increased thermal output!Yes it works via streamer when receiving music upsampled to native DSD512 from Roon
Stalled ATM due to the chassis.... I'll discuss with Jarek if we can get you a uncased PCB set to you sooner then laterAny expected ETA on DevDAC with new streamer and chassis?
There are 2 USB outputs - an Isolated USB1.1 and a non isolated USB1.1 / USB2.0
Each output has it own supply regulator and should not be parallel (using those leads that combine the power outputs).
I tried this cable with S2D with an LPS supplying 5v. That didnt work, as the power leg also needs USB handshake. With a proper USB port it should work. Good cable overall.Pangea, etc., have double headed USB cables with separated data and power legs. When used, one port outputs only power and the other only data which are recombined at the target device.
So, I am hoping the USB1.1 would supply power and USB2.0 would supply data in this case?!
I tried this cable with S2D with an LPS supplying 5v. That didnt work, as the power leg also needs USB handshake. With a proper USB port it should work. Good cable overall.
John has previously indicated that using both outputs would degrade the SQ of the XLR output, if I've understood correctly.Or using both the XLR and RCA outputs ?