John your armcable looks dressed to perfection to me
Who's subchassis is it?
Ps: you could do with a new motor
Upgrading from standard Linn black cable to AO transformed my EKOS - I'd like to compare my instalation with the Sound org AO cable instalation as well. Pics please!
Dont bother. Take the tip or leave it. Give your girlfriend Ynwoan a big kiss for me.
Andrew,
Thanks for the pictures. I'd like to try to get a twist in the my setup with the AO cable somewhere around the DIN plug so that the cable becomes vertical when it gets to the p-clip. This is how my stock cable is setup. I think it will then be easier to bend it back so that it exits the plinth cleanly. It's hard to tell from the picture but it looks like there's only one nut where the p-clip attaches to the bolt and there's a washer between the p-clip and the nut.
Regards,
John
Ok Flapopely, it was after all worthwhile posting your pic because if you compare it with Johns his cable looks (judging from the photos) far too tight and hasnt got as much curve in it as yours. Yours is also much closer to the plinth. So John I would give it a bit more slack when you install the Origami cable.
On initially looking at your photo John, I only meant well; my post wasnt intended as a criticism of your (or your dealers) set up skills.
By the way, the Origami is a damn good cable.
Kanwar.
I think you need a refashioned cable entry on an old lp12, mine is 2010 stock, cut for the T cable.
Ok Flapopely, it was after all worthwhile posting your pic because if you compare it with Johns his cable looks (judging from the photos) far too tight and hasnt got as much curve in it as yours. Yours is also much closer to the plinth. So John I would give it a bit more slack when you install the Origami cable.
On initially looking at your photo John, I only meant well; my post wasnt intended as a criticism of your (or your dealers) set up skills.
By the way, the Origami is a damn good cable.
Kanwar.
i have done it both ways many times...in me life
i much prefer flats solution
although both work fine
john....the more black sleeves/bands you add to the sprung cable length the more you connect the two cables...i prefer to have max 1 band in this area so the cable can move easy
you can cut of the extra bands easy
hope that helps
bw
j7