Chops54
pfm Member
. Could I ask why?
I think I'm entrenched in the old idea of the closed loop. Us old buggers tend to find it hard to break free sometimes especially when something doesn't seem quite right.
. Could I ask why?
It would need milling to reduce the thickness, though it would also need CNC ing for the oval slot srew holes etc so could be done at the same time.
i have a piece of panzerholz,its needs a strip gluing on one edge to get the right dimension,my question was what glue would be ok to use .
The closer you look at the theory of ‘closed loop’ the less it stands up, IMO.
Well Joe your bearing and removeable centre spindle has given me the idea I needed to finish an old project so thank you for that.
Here's my turntable as it is atm,
https://servimg.com/view/11733869/1618
This gives an idea of its construction. Welded steel tube and filled with sand.
https://servimg.com/view/11733869/1620
It all right looking at theories where one can make something look how you want it to. I'm happy to be convinced otherwise but I need rock solid evidence so it would be nice to build a turntable with the option to do either.
What is 'unfinished' .... it looks all there? ....I have looked up that Clearaudio bearing on t'intenet and it is a maglev bearing. Does it levitate your platter or have you added more weight to stop it?