Zaiden
pfm Member
Just seen update 6 Ohm is about right for an "8 ohm" tweeter. If the other one quickly goes off scale then that is the series cap charging up and the tweeter has blown.
Well, that's fantastic to know. Thanks for your insight! There is just too much to learn from people like yourself and Graham R.
I've had my eye on this replacement voice coil. Do you think this could do the trick in terms of fixing the blown tweeter, or is the issue beyond that?
https://www.ebay.co.uk/itm/14414509...d=link&campid=5338728743&toolid=20001&mkevt=1
The tweeter itself looks like it has a latch mechanism so it looks like I can switch it out fairly easily, if this really is what's the problem.
And personally, would you recommend getting two new Scanspeak D2010 tweeters, or just one new one to replace the broken one (my fear is I'm not sure if there would be matching issues - like the replacement one sounding slightly different from the original one, so having two matching replacements could make more sense)
This site contains affiliate links for which pink fish media may be compensated.