Have put an interest check up for an a60 cartridge loading module
Circuit board is printed "ULM60 issue 1"
Would like it to go to a good home.
Don't have instructions but maybe someone can help with that. 5 switches.
Am missing the A60 already...
Remember that Operajulian's list of part is applicable to his revision of the A60 and may not be to yours. Take the values from the service manual diagrams relevant to your version and use the various posts as brand/replacement type rather than value guides.After this I get into the really exciting stuff of doing (drum roll) THE REBUILD, combining your Excel from #271, Roberts, the SM, & all the helpful little bits from this thread.
Thankyou for the confirmation, & reiterating about the transistors (I assume Q13 - Q21 + other channel).The bulb in series with the mains is essential if the speaker fuses are gone. It's all too likely that the output transistors are shorted.
Correct.Remember that Operajulian's list of part is applicable to his revision of the A60 and may not be to yours. Take the values from the service manual diagrams relevant to your version and use the various posts as brand/replacement type rather than value guides.
Absolutely.Best to get it going "as is" before making mods. You need a known working unit as a basis so that any problems are due to your changes only.
...
Just bought some tant capacitors to try on the T21 to see if that helps with the drifting tuning as suggested on other threads.
Have fun and good listening.
Julian