gingermrkettle
Deep vein trombonist
Even if you could jack them, I doubt you could really get most modern car tyres off with hand tools given the torque levels involved.
Even if you could jack them, I doubt you could really get most modern car tyres off with hand tools given the torque levels involved.
what you bought? Taycan?
If you used the supplied jack and in the correct jacking points (usually specified in the manual)?
How can you be at fault.
Taken a punt on a Polestar 2.
How are you expected to change a flat on the side of the road if the car can't be jacked?
1. Place tyre iron on lowermost bolt, shaft touching ground.Even if you could jack them, I doubt you could really get most modern car tyres off with hand tools given the torque levels involved.
You forgot 1a: hope flats on the nuts, and length of the torque bar, are conveniently arranged to make this viable.1. Place tyre iron on lowermost bolt, shaft touching ground.
2. Drive a few inches in appropriate direction.
3. Repeat.
Audi Manuals: How to change a lightbulb. Take it to your nearest qualified workshop..........
Interesting thread, we don't have mobile tyre service for cars in Malaysia and I have had punctures a LONG way from the nearest tyre shops.
If the car body is not strong enough to support the battery, what happens if a wheel goes into a drain after a grille collapses, which has happened to me a couple of times
It really doesn’t help that it’s virtually impossible to buy a car with sensibly sized wheels with tyres which have a bit of profile on them. When you look at the state of the roads, 16 or 17 are about as big as you should go with at least a 60 profile!
My 2005 A4 Cab technically had to go to the dealer for a bulb change. The cluster has to be removed so you can gain access to the bulb clip. Both the dealer and Halfords also managed to lose the spring loaded bulb clip that keeps it centered in the housing, unnoticeable until you've long gone and wonder why one of the headlights is pointing in the wrong direction after a while. The dealer picked up the £300 cluster replacement the first time and the second time I ended up using a bit of bent wire to replace it. After that I ended up carrying a torx screwdriver hastily bought on the M40 services and doing it myself.Audi Manuals: How to change a lightbulb. Take it to your nearest qualified workshop..........
Can you even lift one of the wheels? Many modern car wheels are getting beyond the average persons weightlifting abilitiesOur car is everything you hate in a single package!
Electric, no jack and 22" wheels with 40 profile.