Nye Samuel
Herr Katze
I have just bought a 32.5 and have the RSL loaner set...Z250V (321), Z301 (729) and MM phono boards and no problems so far...the rest of system is Hicap and 110...source: vinyl, CD and tuner.
Let me explain. I was listening to vinyl via phono 1 and was only getting sound from one channel...so I flicked the mono/stereo to mono and got sound in both channels.
So I opened up the 32.5 and checked the phono boards were solidly in place and the phono cables from the TT were fully in place; both boards and cables were fully engaged. I tried again...again phono 1(vinyl) was wrong...this time on stereo one channel (left) was fine but the other channel (right) was very quiet but audible...switching to mono...the sound became balanced but the right channel became very quiet again. I switched phono 1 and 2...and it was the same but I noticed if I then used CD/tuner...it would work both channels in stereo and then I found the phono 1 (vinyl) worked fine in stereo...What has happened? Have I got a problem with the mono/stereo toggle switch?
Let me explain. I was listening to vinyl via phono 1 and was only getting sound from one channel...so I flicked the mono/stereo to mono and got sound in both channels.
So I opened up the 32.5 and checked the phono boards were solidly in place and the phono cables from the TT were fully in place; both boards and cables were fully engaged. I tried again...again phono 1(vinyl) was wrong...this time on stereo one channel (left) was fine but the other channel (right) was very quiet but audible...switching to mono...the sound became balanced but the right channel became very quiet again. I switched phono 1 and 2...and it was the same but I noticed if I then used CD/tuner...it would work both channels in stereo and then I found the phono 1 (vinyl) worked fine in stereo...What has happened? Have I got a problem with the mono/stereo toggle switch?