Stunsworth
pfm Member
Any updates on the MDAC? it seems like it will never be finished -_-
It's finished - as in there'll be no update.
Any updates on the MDAC? it seems like it will never be finished -_-
It's finished - as in there'll be no update.
With two more DAC channels (2+2+2), this has the potential to become a 5.1 AV decoding solution...
What does it mean?
What does it mean?
I mean - all they have to do is to make the PCB somewhat more "narrow" and DIC fits it perfectly. That is, until it encounters a male connector on the main PCB, then it's going to get weird.That would be great. I can put HDMI extract in one FDAC and Sub outputs in the second FDAC.
Just one thing, the name, 'DIC'? really?
How about Digital Expansion Card, 'DEC'. Should remove any misinterpretation
Cable attached, Input on Imac says Digital in, but nothing to record while playing Music over USB.
Any ideas how to check the connection is correct?
Cable attached, Input on Imac says Digital in, but nothing to record while playing Music over USB.
Any ideas how to check the connection is correct?
That would be great. I can put HDMI extract in one FDAC and Sub outputs in the second FDAC.
Just one thing, the name, 'DIC'? really?
How about Digital Expansion Card, 'DEC'. Should remove any misinterpretation
DIC's well you know... no need to be shy
DEX is an internal Digital Expansion card where the PMD200 can be installed or other future options.
The MDAC2 project is not going to happen. It's been replaced by the FDAC.
So what about the payments I have transferred for the MDAC2?
What now?
The Insolence to have the customers wait for so long and not get any notification or emails, I don't know what to do now.
What am I to do now? Can I get some information by JohnW regarding the NEW FDAC and what do I ****ing do with the MDAC now?
I'm sorry that it appears you are unaware of change as the communications for this project has ALWAYS been via PFM, this is a forum based project, the changed happen in August last year.
Your last communications concerning the project was in Dec, since the change to FDAC:-
http://www.pinkfishmedia.net/forum/showthread.php?p=2737357#post2737357
We have you down as having paid the development instalments for the FDAC L2 and no further development payments are required for L2 Spec units.
It's pretty funny that you do not have a refund policy especially when you change the whole project.
Joker_Hartmann said:Cable attached, Input on Imac says Digital in, but nothing to record while playing Music over USB.
Any ideas how to check the connection is correct?
FYI A08 did not work for me, had to go back to V0.90.What MDAC software are you using? if A10 then try A08.