I have had my deck back from Loricraft for about a week now so i thought i would post my results.
I had the 401 fully stripped and rebuilt not just serviced as it had never seen any attention in its whole life.
The insides are fantastic now, everything clean, oiled, replaced that needed it etc. It spins so smoothly and runs up and down from speed so well. The speed control is spot on accurate now too.
The plinth is their skeletal plinth in black. As you can see this is two layers with aluminium struts and black squash balls at the top connecting the two layers. This gives the deck just a bit of give.
They also made me a custom mount for my Aro. This gives adjustment for overhang, something missing from the Aro! While they where at it i got a new mat (looks like cork but isn't) and two rubber rings around the platter to reduce ringing.
Everything was done to a very high standard.
Now the important part, the sound!
Compared to the 401 before in a plinth purchased off ebay (the guy who makes them with sme mounts all the time) this is another league. No comparison.
It is the exact same sound as before, just everything is so much better. It all works so well together. I can not find fault with it.
The bass is spot on, the mids are perfect and the highs that used to be a little congested are now crisp clean.
If you have a Garrard you should take it to Loricraft just to see what can be achieved.
I have found my perfect deck! I can't see any need to change this ever. My quest is over (except maybe the cartridge ).
I had the 401 fully stripped and rebuilt not just serviced as it had never seen any attention in its whole life.
The insides are fantastic now, everything clean, oiled, replaced that needed it etc. It spins so smoothly and runs up and down from speed so well. The speed control is spot on accurate now too.
The plinth is their skeletal plinth in black. As you can see this is two layers with aluminium struts and black squash balls at the top connecting the two layers. This gives the deck just a bit of give.
They also made me a custom mount for my Aro. This gives adjustment for overhang, something missing from the Aro! While they where at it i got a new mat (looks like cork but isn't) and two rubber rings around the platter to reduce ringing.
Everything was done to a very high standard.
Now the important part, the sound!
Compared to the 401 before in a plinth purchased off ebay (the guy who makes them with sme mounts all the time) this is another league. No comparison.
It is the exact same sound as before, just everything is so much better. It all works so well together. I can not find fault with it.
The bass is spot on, the mids are perfect and the highs that used to be a little congested are now crisp clean.
If you have a Garrard you should take it to Loricraft just to see what can be achieved.
I have found my perfect deck! I can't see any need to change this ever. My quest is over (except maybe the cartridge ).