Automatic line level detection

[Bemused]

sam_cat
Quantity of PCB 6
Quantity of Relays 6

martin clark
Quantity of PCB 3
Quantity of Relays 3

thommy
Quantity of PCB 4
Quantity of Relays 4

timH
Quantity of PCB 6
Quantity of Relays 6
Address given

 

[Bemused]

Nipped down the village and posted out Martins set
Unfortunately forgot to take Tims address with me so his are still here.

I need to dig out the costs before I can let you know what you owe, no panick. I am sloppy with my records.

Martin, I took liberty and bunged in a Mite regulator. Perhaps you could give it the once over?

There are two board errors on the Mite.

First is the LEDs are not polarity marked which is a no brainer.

Secound is the CCS transistors Q4 and Q5 which have the wrong footprint. These two need rotating 180 degrees before fitting.

Just Sam_cat and thommy to supply addresses.
Email me
tony at eclfirst dot co dot uk

sam_cat
Quantity of PCB 6
Quantity of Relays 6

martin clark
Quantity of PCB 3
Quantity of Relays 3
Posted out

thommy
Quantity of PCB 4
Quantity of Relays 4

timH
Quantity of PCB 6
Quantity of Relays 4
Address given

 

[Bemused]

Tim, sorry I missed the post office today

Martin, worked out the costs, I reused a jiffy for yours
PCBs £1.92 each
Relays £1.33 each

Just Sam_cat and thommy to supply addresses.
Email me
tony at eclfirst dot co dot uk


sam_cat
Quantity of PCB 6
Quantity of Relays 6


martin clark
Quantity of PCB 3
Quantity of Relays 3
Posted out
Cost £10.65


thommy
Quantity of PCB 4
Quantity of Relays 4

timH
Quantity of PCB 6
Quantity of Relays 4
Address given

 

[Bemused]

Tim, got yours in the post yesterday.

PCBs £1.92 each
Relays £1.33 each

Just Sam_cat and thommy to supply addresses.
Email me
tony at eclfirst dot co dot uk


sam_cat
Quantity of PCB 6
Quantity of Relays 6
Cost £20.32
paypal please to tony at eclfirst dot co dot uk


martin clark
Quantity of PCB 3
Quantity of Relays 3
Posted out
Cost £10.65
paypal please to tony at eclfirst dot co dot uk


thommy
Quantity of PCB 4
Quantity of Relays 4
Cost £14.02
paypal please to tony at eclfirst dot co dot uk


timH
Quantity of PCB 6
Quantity of Relays 4
Posted out
Cost £17.66
paypal please to tony at eclfirst dot co dot uk


Don't forget your donations to TonyL here

 

[martin clark]

Boards & relays arrived on Monday in perfect condition - now paid for. Many thanks, Tony

 

[Bemused]

Thanks Martin, did you read my note about the CCS transistors having the wrong foot print?

 

[timH]

Arrived today. Will PayPal imminently. Now need to work out how to do the unbalanced version.

Ps thanks

 

[martin clark]

Tony - I haven't had time to play yet, but noted - thanks.

 

[Bemused]

Arrived today. Will PayPal imminently. Now need to work out how to do the unbalanced version.

Ps thanks

No need to break your neck rushing to pay Tim.
Just connect the unbalanced the same as you would a ballanced.
Balanced > Hot / Cold
Unbalanced > Signal / ground
Same connections on the detector board.

Connect it all up, turn volume to minimum on your preamplifier then turn the detectors trimmer clockwise untill the relay picks up.
Now turn the trimmer back around 1/4 turn anticlockwise.
The voltage on terminal X4-2 will very slowly decay over the next fifteen minutes or so, at around 2v7 the relay will drop off. If the voltage stays high back the trimmer a little more.

Make sure you get the Omron relay the right way round, best picture is in post 91 if you need a reference.

 

[Bemused]

Tony - I haven't had time to play yet, but noted - thanks.

Of course, take as long as you wish. I am pleased your up for a little proof testing
I think there are just the two silk errors to fix then a few options need adding to get the generic Mite upto speed.
I now have four of the Mite for SEN running and a fifth as a genral 3v3 regulator.

 

[Bemused]

PCBs £1.92 each
Relays £1.33 each

Just Sam_cat and thommy to supply addresses.
Email me
tony at eclfirst dot co dot uk

PCBs £1.92 each
Relays £1.33 each


sam_cat
Quantity of PCB 6
Quantity of Relays 6
Cost £20.32
paypal please to tony at eclfirst dot co dot uk


thommy
Quantity of PCB 4
Quantity of Relays 4
Cost £14.02
paypal please to tony at eclfirst dot co dot uk


timH
Quantity of PCB 6
Quantity of Relays 4
Posted out
Cost £17.66
paypal please to tony at eclfirst dot co dot uk


Don't forget your donations to TonyL here

 

[sam_cat]

Payment sent along with postal address. Sorry for missing this, had a lot of stuff going on.

Thanks.
Sam

 

[Bemused]

Payment sent along with postal address. Sorry for missing this, had a lot of stuff going on.

Thanks.
Sam

Its no problem Sam, you're a long standing member with a fine and valued history here.
I sat on the parts for some weeks for just the very same reason, some shit happened but was only work so not serious
Hope you climb out of your hole.

 

[Bemused]

Posted you out today Sam.
Let me know when you get them.

 

[thommy]

Am in Cambodia for the winter, only just spotted this also. Thanks Tony, have fired the funds over to you.

 

[sam_cat]

Posted you out today Sam.
Let me know when you get them.

Arrived yesterday, thanks for that. Will get them built soon

 

[Bemused]

Am in Cambodia for the winter, only just spotted this also. Thanks Tony, have fired the funds over to you.

Thanks, do you want me to post them out or wait until your return?

 

[Bemused]

Arrived yesterday, thanks for that. Will get them built soon

Thanks Sam, have fun.

 

[timH]

Readies sent

 

[Bemused]

Readies sent

Received with thanks