Recent content by Tomasz

Hi Sorry for answering so late. Doolav, i have the standard, upgraded (ver 2) tos power supplies. I am quite happy with it, its much better than the first version was. If i can help you with uC or screen dont hesitate to contadt me...well it may take some time to answer, but will do my best...

If the would be enough interest from pfm members i could maybe prepare some cases with drilling, milling done plus microcontroller with tft plus apple remote plus separate power supply all isolated from dac. But this is not he thing to be prepered over the weekend, especally the software would...

I found the display, http://rover.ebay.com/rover/1/707-53477-19255-0/1?icep_ff3=2&toolid=10001&campid=5338728743&icep_item=221428077344 It would fit the 2u case from modushop. You could also get one together with shield and due for under 50€

Sq225917, Actually there is no list of parts, its basically standard dual mono buffalo with modified hifiduino software. The case is from modushop and the miling was done localy. I use arduino due + tft shield + 4,3 tft display for controlling dac (thats still work in progress). Would have to...

Thanks Tony, thats nice to hear !

Hi Tony, I am sure my buffalo doesnt even come close to yours in terms of sound quality, but it still sound ok ;) it also not as creatively and innovative designed as yours, but there is no buffalo out there that come even close to yours i suppose ;) Tomasz

Hi all, Finally I got my buffalo to the point where it makes me not ashamed of my work. Well it’s not completely done, but it has finally got the shape I was heading to. I decided to post some photos, so maybe it will help some members of pfm in building own one…if buffalo is still on...

Basicaly its the like 3 legs reg, so you have input, output and common ground. I have put them in my flatcap back in the days, the result was great!

Thats really interesting thread, i also didnt want to try all possible tweaks, but get just best results for the money. So, i have the last version of TPA regs....tridents and new HDs. This make big difference togetehr with dual mono. I also tried Panasonic ECHU in positions of c1-4 and...

....ability of reading is sometimes usefull ;) ...maybe i shall try it in the future :P

Gentelmen, I think the problem is identified, i am using smart wiring from hifiduino for input signal https://hifiduino.wordpress.com/2012/11/15/buffalo-iii-smart-stereo-input-configuration/ ...and it seems its not smart enough for dual mono. Going to have a deteiled look at it, it...

Ohhh yes, the Suffolk Tony is a true gentelman...i know, he is the good guy. But, just wanted to ask what version of the code have you used? Maybe my is too old or something

Neeee...i have changed nothing in registry setting, just uncommented the Define DUALMONO But, im using buffalo III not the IIIse...hope it makes no difference

i skipped this one #ifdef DUALMONO // If dual mono write also to the other chip. writeSabreRightReg(regAddr, regVal); // Set the right chip (addr 0x49) to be the right channel reg17R=reg17; writeSabreRightReg(0x11, bitSet(reg17R,7)); #endif DUALMONO reg17, last bit set to 1 -...

Hi Tony, you are probably right with the settings of register 17. I was actually checking it couple of times, but will have to see again. I have also found similar issue on twistedpearaudio, where the solution seemed to be switches settings (which of course doesnt work in my case)...