Recent content by binnie

I just joined this for 2 / 2 (fulfilled the Google form), I hope it is not too late. Thank You Andrew for organising this GB ! Olivier

Hello Andrew, I am the lucky owner of Your previous Ittok and still very happy with it. My LP12 is a simple one and the system is also simple: Nagaoka MP30. The only mod I did was to exchange the beautiful counter-weight for an EKOS one. It removed a little bit of the edgeness without...

Thanks Alex and Alan :cool:

Thanks ! Which Modushop case was it ?

Thanks for the feedback! How does the bottom plate look like ? Is it strong enough to support big trannies ?

Parcel safely landed in Munich, a big big Thanks to You shoom ! Olivier

Hello, I do not yet own a RPi but read a lot about it. In this document: https://learn.adafruit.com/downloads/pdf/introducing-the-raspberry-pi-model-b-plus-plus-differences-vs-model-b.pdf adafruit explains that the power supply of the new model B+ was "improved" using Buck-converters instead...

Phono stage modified and directly beside the B4 (also lightly modified) on the same plate and connected to my modified NAP160 via a DIY cable. This place and you guys are responsible for allmost all mods ... thanks a lot !!!

Same as grazie, we need an eMail address otherwise your PM account will be fullfilled within one hour :) cheers Olivier

Yep Me too ! I will go for the TeddyRegs in the future but currently everything is fine so I just enjoy it as it is :)

Hi, I would also jump in for 4 boards and 4 heatsinks (if not too late ?) Thanks a lot, Cheers, Olivier

First quick try: (I'm french, therefore I do not take any responsability in case you burn your amplifier :p): Standby current • Preparation of the unit: Set up the unit in normal position and protect it against the direct air from air conditioning or fan. Adjustment should be done at...

Yes but not only in steady state, also see what happen when you switch the pre on/off. Best is to use a digital USB oscillo for this. Anyway, I was always impressed by the sound impact of the NAP-input cap ! Just try several approaches until you are happy.

Hello Colasblue, I am correct ? And what about the relais connecting the 321s to the amp, do they have their own supply ? Olivier

+1 !