bhope58122
pfm Member
Excellent condition throughout with nothing of note to mention in all honesty in regards to it’s condition.
8ohm & 15ohm speaker outputs
Recently been treated to a brand new matched set of 8 Genalex Gold Lion KT66 output valves at a cost of £650. It was serviced a couple of years back by HiFi Sound in Middlesbrough (previous owner) and has been used sparingly since. I can’t see anything that needs replacing. I’ve recently had one of the front knobs replaced for a brand new one (at a cost of £75) as the one was a bit more discoloured than the other, the second one has lost a bit of gold but nothing major. The one that was replaced is also included (so 3 in total)
As the KT66 are such big valves, the cages don’t fit over the top of the valves. They are obviously included though, and can be seen in other photos when I had EL34 valves installed.
It’s a nightmare to photograph with all the polished surfaces, none of which I can see are scratched at all. I’ll add pictures accordingly when I can get a decent one without seeing my ugly mush in the reflection!
with what I originally paid and the cost of the KT66 I think that £2000 collected from Shrewsbury is fair.
If you wish to arrange your own courier I will cooperate but will not be held responsible for any damage. It has its original packaging so I don’t envisage any issues. As the cages don’t fit over the KT66 the valves will need to be removed and sent separately so bear this in mind. I will not send them in the same packaging as they’ll just get smashed.
8ohm & 15ohm speaker outputs
Recently been treated to a brand new matched set of 8 Genalex Gold Lion KT66 output valves at a cost of £650. It was serviced a couple of years back by HiFi Sound in Middlesbrough (previous owner) and has been used sparingly since. I can’t see anything that needs replacing. I’ve recently had one of the front knobs replaced for a brand new one (at a cost of £75) as the one was a bit more discoloured than the other, the second one has lost a bit of gold but nothing major. The one that was replaced is also included (so 3 in total)
As the KT66 are such big valves, the cages don’t fit over the top of the valves. They are obviously included though, and can be seen in other photos when I had EL34 valves installed.
It’s a nightmare to photograph with all the polished surfaces, none of which I can see are scratched at all. I’ll add pictures accordingly when I can get a decent one without seeing my ugly mush in the reflection!
with what I originally paid and the cost of the KT66 I think that £2000 collected from Shrewsbury is fair.
If you wish to arrange your own courier I will cooperate but will not be held responsible for any damage. It has its original packaging so I don’t envisage any issues. As the cages don’t fit over the KT66 the valves will need to be removed and sent separately so bear this in mind. I will not send them in the same packaging as they’ll just get smashed.