Hello Mr gustavm,
It's a very benign room, for the reasons you mention. It's also very long - it's part of our Suffolk Longhouse -
Amazing
System Pics 2023
- Thread starter Chris81
- Start date
Amazing
chris turner
pfm Member
Lovely Spot Tony, always thought your pics make it look a very nice placeHello Mr gustavm,
It's a very benign room, for the reasons you mention. It's also very long - it's part of our Suffolk Longhouse -
I recall your system in a previous incarnation was probably the most number of boxes I've ever seen in one place, and most impressive too, how does this current setup up compare?
All the best
Subharmonicon
pfm Member
htm_1968
pfm Member
Subharmonicon
pfm Member
I'm really out of practice with posting photos here.. Many thanks for sorting this for meHere you go
Iain Docherty
pfm Member
Latest turntable acquisition: Linn Axis with…
Plinth refurbed in matt black lacquer by HQ Lacquer
Power supply board recapped and calibrated by Valhalla Electronics
Akito arm rebuilt and rewired by Audio Origami
Audio Technica AT95ML in a RigB body (a modern K9/K18 if you will).
Not bad for 30 years old!
Plinth refurbed in matt black lacquer by HQ Lacquer
Power supply board recapped and calibrated by Valhalla Electronics
Akito arm rebuilt and rewired by Audio Origami
Audio Technica AT95ML in a RigB body (a modern K9/K18 if you will).
Not bad for 30 years old!
John
Rack’em Up!
The Axis plinth looks much different from this early one I’m working on.Latest turntable acquisition: Linn Axis with…
Plinth refurbed in matt black lacquer by HQ Lacquer
Power supply board recapped and calibrated by Valhalla Electronics
Akito arm rebuilt and rewired by Audio Origami
Audio Technica AT95ML in a RigB body (a modern K9/K18 if you will).
Not bad for 30 years old!
Iain Docherty
pfm Member
That’s a Mk1 as opposed to my Mk2 and yes, there are quite a few differences in detailThe Axis plinth looks much different from this early one I’m working on.
Ponty
pfm Member
Latest turntable acquisition: Linn Axis with…
Plinth refurbed in matt black lacquer by HQ Lacquer
Power supply board recapped and calibrated by Valhalla Electronics
Akito arm rebuilt and rewired by Audio Origami
Audio Technica AT95ML in a RigB body (a modern K9/K18 if you will).
Not bad for 30 years old!
That’s very nice. Had one just the same for years (with a K18). The plinth refinish looks great.
Morning all
First time post on here, not yet sure how to get the picture into the post (will work that out later).
Current line up is:-
Technics Sl-M1
Technics RS1500
Prima Luna Evolution 400 pre amp
Prima Luna Evolution 400 amp
Cambridge CXN-V2
Roksan Attessa cd
Sony SCD-XE670 cd
Dali Sensa 7 speakers
I have a pair of ProAc D30 on trial to as looking to replace the Dali's.
Cheers
Simon
First time post on here, not yet sure how to get the picture into the post (will work that out later).
Current line up is:-
Technics Sl-M1
Technics RS1500
Prima Luna Evolution 400 pre amp
Prima Luna Evolution 400 amp
Cambridge CXN-V2
Roksan Attessa cd
Sony SCD-XE670 cd
Dali Sensa 7 speakers
I have a pair of ProAc D30 on trial to as looking to replace the Dali's.
Cheers
Simon
James Evans
Bedroom Bodger
It's photos like that that really make me want to own an LP12, if only just to look at. Such an iconic design, and the logo/font on that armboard looks superbHere you go
Salamander
pfm Member
@s1simon Good luck with posting your photos, I use Postimages — free image hosting / image upload
PhilofCas
pfm Member
PhilofCas
pfm Member
Sorry, not sure what’s going wrong, where are your photos held?
Big Tabs
looking backwards, going forwards
I haven't put a system pic up for a while - here are a few angles.
straight on from the listening position
The door with cables, many headphones and audiophile room treatment jackets...
HiFi 'A' - Sansui SR-525 DD turntable to Arkless phono - Heybrook TT2s with Origin Live Onyx arm and Inpire/Heed PSU to Arkless Turbo phono
Roksan Blak c.d. player - Roksan K3 int. Amplifier
Second system - Technics SL-D202 Direct Drive semi-auto - Technics SU-&100 amp, Arcam Alpha 9 with slight mods
all connected to IMF Super Compact II's
obligatory window/view shot - featuring The Field and my ace Yeti.
straight on from the listening position
The door with cables, many headphones and audiophile room treatment jackets...
HiFi 'A' - Sansui SR-525 DD turntable to Arkless phono - Heybrook TT2s with Origin Live Onyx arm and Inpire/Heed PSU to Arkless Turbo phono
Roksan Blak c.d. player - Roksan K3 int. Amplifier
Second system - Technics SL-D202 Direct Drive semi-auto - Technics SU-&100 amp, Arcam Alpha 9 with slight mods
all connected to IMF Super Compact II's
obligatory window/view shot - featuring The Field and my ace Yeti.
Colonel_Mad
pfm Member
Current system - Accuphase pre & A48 amp, Chord DAVE/ upscaler, Melco server, LP12, Naim DBL speakers on my DIY “Mana” copy soundbases, which work very well.
When did you move away from the Naim electronics Tony? Was surprised to see your set up. I'm not a big follower of these System Pics threads but remember your big Naim system of yore. Are the DBLs going next? I can't believe you aren't tempted to experiment in the new system.
Suffolk Tony
Aim low, achieve your goals, avoid disappointment.
Hello Mr Colonel_Mad,
It's a long story, but health issues made simplifying my system a good move. Plus, my wife had been wanting to reorganise our room, not feasible with a wall-full of black boxes! Despite a few contenders I've yet to hear any speaker I prefer over my trusty DBLs, so they're staying put for the time being.
