I posted something a while ago about a midrange colouration with my 15's mounted in corner Yorks.
Out of idle curiosity I pulled the drivers out and found that the foam gaskets are pretty much at the same level as the frame. I had backed off the torque on the nuts to a bit more than finger tight but obviously this wouldn't matter once the foam had compressed. Im thinking this is a likely cause of my issue, the next question is are they available or is it something I can buy elsewhere and cut ?
Out of idle curiosity I pulled the drivers out and found that the foam gaskets are pretty much at the same level as the frame. I had backed off the torque on the nuts to a bit more than finger tight but obviously this wouldn't matter once the foam had compressed. Im thinking this is a likely cause of my issue, the next question is are they available or is it something I can buy elsewhere and cut ?