rockingdoc
pfm Member
Using an SME 20 and SME V arm. Every record sounds much better from half way in the side i.e. the inner part of the disc, which should in theory sound worse, is very much better. This is not a subtle effect, so something is wrong with the playing of the outer tracks.
I have checked, re-checked and completely dismantled and set up again the arm geometry using several different protractors. The cartridge has been changed, alignment adjusted, VTA, downforce, bias all changed, but the effect remains. The turntable is stable and level.
My instinct is to suspect the arm bearings, but it moves very freely with no sticky points.
Any suggestions?
I have checked, re-checked and completely dismantled and set up again the arm geometry using several different protractors. The cartridge has been changed, alignment adjusted, VTA, downforce, bias all changed, but the effect remains. The turntable is stable and level.
My instinct is to suspect the arm bearings, but it moves very freely with no sticky points.
Any suggestions?