jonnoshore
physicist, engineer and healer
As I now have a SNAXO power supply I was considering doing the equivalent as MR. Tibbs has done with his Traco DC-DC things.
Question: Does anyone know what the pin outs are on the SNAXO 2-4 19 pin socket. I have found a picture of the 52 socket which is powered by a Supercap so will have the same. I assume the ch1/ch2/earth will be the same but not all of the 24vs are needed...
What I was thinking of doing was making a small plastic box which has to house the Traco's and the 6(?) regs in that would be external to the main SNAXO2-4 but would literally sit on the back of the Supercap socket.
This little box would need:
a socket for signal in from 102
a socket for +24v dc in from Hicap to Traco (earthing separate from above)
2 Tracos linking to...
regulators linking to the 24v outputs on the
a 19pin plug output for the SNAXO2-4
The wired from the 'box' to the rails would not be too long ~200mm if the box was right on the socket... I was thinking this way I could leave the SNAXO unmodded...
Thoughts...
Mr. Tibbs could this work? Is the cable length critical or would the small length from the back of the box to the circuit be an issue.
Question: Does anyone know what the pin outs are on the SNAXO 2-4 19 pin socket. I have found a picture of the 52 socket which is powered by a Supercap so will have the same. I assume the ch1/ch2/earth will be the same but not all of the 24vs are needed...
What I was thinking of doing was making a small plastic box which has to house the Traco's and the 6(?) regs in that would be external to the main SNAXO2-4 but would literally sit on the back of the Supercap socket.
This little box would need:
a socket for signal in from 102
a socket for +24v dc in from Hicap to Traco (earthing separate from above)
2 Tracos linking to...
regulators linking to the 24v outputs on the
a 19pin plug output for the SNAXO2-4
The wired from the 'box' to the rails would not be too long ~200mm if the box was right on the socket... I was thinking this way I could leave the SNAXO unmodded...
Thoughts...
Mr. Tibbs could this work? Is the cable length critical or would the small length from the back of the box to the circuit be an issue.