Setting a P75 phono stage and DV 20XL

[kwmason]

CAn anyone confirm that when setting up my Dynavector P75 phonostage in enhanced mode with Dynavector 20XL cartridge that the cartridge is classed as a low resistance coil?

The specification for the cartridge says its impedance is 5ohms

The P75 instructions say set output level depending on the coil resistance.

I trust coil resistance and impedance are the same thing?

Im sure im right just thought best check

 

[Gromit]

5 ohms internal on the 20XL means set it to 'low' resistance coil on the Dr T.

 

[speedysteve1]

Try the Phono enhancer / Dr T setting but also the other lowish ones.
My ears with the AT 33PTG prefered the low setting but not the phono enhancer one...

 

[Eyebroughty]

I can send you a picture of the settings for a 20xl if you want.

 

[kwmason]

Cheers all,

I set it to low and can confirm i prefer the sound compared to none enhanced mode.

Once i had managed to get at the jumpers with my short nails i hasten to add.

Thanks for the offer John - i followed the diagram in the instructions

KW