The Captain
~~~~~~~~~~
Ive a tangled mess of a modded 32.5 now i cant remember if I should implement the above idea..
As now, the gain 321's have their motherboard tracks cut, so an s'reg each sitting locally, & fed from a diy raw psu. Each other board (6x) has a teddyreg squeezed nearby, this lot fed from a cheapie HP psu.
So the gain boards still have the 27r/ oscon 56uf next to it.. the other boards have the 27r/ maroon 47uf. Should these all be removed for a 1r was it? or just the gain boards? I cannae remember if good idea or what..
opinions helpful, cheers Xapt.
As now, the gain 321's have their motherboard tracks cut, so an s'reg each sitting locally, & fed from a diy raw psu. Each other board (6x) has a teddyreg squeezed nearby, this lot fed from a cheapie HP psu.
So the gain boards still have the 27r/ oscon 56uf next to it.. the other boards have the 27r/ maroon 47uf. Should these all be removed for a 1r was it? or just the gain boards? I cannae remember if good idea or what..
opinions helpful, cheers Xapt.