Midlandaudiox
Trade: Midland Audio X-Change
FHOO1 Horn Speaker
The Ferguson Hill loudspeakers are full range units from 150Hz - 20KHz, with no crossover, however, a sub bass unit is required below 150Hz. They reproduce music with a high level of clarity, detail and dynamics, are highly efficient, and will go loud with just a few watts (5 watts).This allows their use with relatively low powered amplifiers further increasing the level of clarity obtainable, from such relatively 'simple' amplifier circuits. The stands are a welded stainless steel construction, satin polished, with internal damping, integral spikes, supplied with floor protector discs.The horns are made from toughened cast acrylic, precision moulded, 8mm thick.The support ring and phase plug are precision machined from aluminium alloy, and have a protective anodised finish. The drive unit is a modified Lowther DX3 full range driver.They require a sub bass/sub woofer from 150 Hz down, with level control, ideally taking the signal from the preamp stage. Recommended amplifier power, 3 to 50 watts, they are ideally suited to low power valve amps, and also work well with high quality transistor amps. (A demonstration with your chosen amp is highly recommended).
Speaker dimensions
Height 1.65m
Width 0.92m
Depth 0.72m
Specification
Drive unit: Modified Lowther DX3
Sensitivity 1M/1KHz/1 watt 100db
Nominal impedance 8 ohm
Weight 27 Kg each without damping fill
http://www.fergusonhill.co.uk/product_details.php?id=3
UK Retail price £17144 we are selling at £5499 collection is essential as we only have the boxes for the Lowthers
The Ferguson Hill loudspeakers are full range units from 150Hz - 20KHz, with no crossover, however, a sub bass unit is required below 150Hz. They reproduce music with a high level of clarity, detail and dynamics, are highly efficient, and will go loud with just a few watts (5 watts).This allows their use with relatively low powered amplifiers further increasing the level of clarity obtainable, from such relatively 'simple' amplifier circuits. The stands are a welded stainless steel construction, satin polished, with internal damping, integral spikes, supplied with floor protector discs.The horns are made from toughened cast acrylic, precision moulded, 8mm thick.The support ring and phase plug are precision machined from aluminium alloy, and have a protective anodised finish. The drive unit is a modified Lowther DX3 full range driver.They require a sub bass/sub woofer from 150 Hz down, with level control, ideally taking the signal from the preamp stage. Recommended amplifier power, 3 to 50 watts, they are ideally suited to low power valve amps, and also work well with high quality transistor amps. (A demonstration with your chosen amp is highly recommended).
Speaker dimensions
Height 1.65m
Width 0.92m
Depth 0.72m
Specification
Drive unit: Modified Lowther DX3
Sensitivity 1M/1KHz/1 watt 100db
Nominal impedance 8 ohm
Weight 27 Kg each without damping fill
http://www.fergusonhill.co.uk/product_details.php?id=3
UK Retail price £17144 we are selling at £5499 collection is essential as we only have the boxes for the Lowthers