teddy_pardo
Trade: Teddy Pardo
Here is a project that I had in mind for a long time.
Over the years I upgraded my old LP12 and replaced every possible part. Each time I kept the old parts and realized that I can almost build a new turntable, but different...
It starts by fitting TangoSpinner feet, which I mounted on small 10mm Plexiglas squares.
Then, fixing an OroginLive DC motor, again with Plexiglas
Next, place the inner platter, left from a cirkus upgrade
And an outer platter taken from an old Thorens TD160. The outer platter required some adaptation as the diameter and height are slightly different.
Adding a Mat made of Silicone foil usually used for coocking
And to finalize, a TangoSpinners record clamp
To the OriginLive I connected one of our power supplies to which I have added a trimmer for fine speed adjustment.
Sound is fantastic![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Over the years I upgraded my old LP12 and replaced every possible part. Each time I kept the old parts and realized that I can almost build a new turntable, but different...
It starts by fitting TangoSpinner feet, which I mounted on small 10mm Plexiglas squares.
![IMG_0199_zps4qm7k8mf.jpg](/forum/proxy.php?image=http%3A%2F%2Fi27.photobucket.com%2Falbums%2Fc186%2Fteddy_pardo%2FDIY%2520Turntable%2FIMG_0199_zps4qm7k8mf.jpg&hash=21d7feeaf2ac65f7acc7dc9e78b2b031)
![IMG_0198_zpsv2p5rkyt.jpg](/forum/proxy.php?image=http%3A%2F%2Fi27.photobucket.com%2Falbums%2Fc186%2Fteddy_pardo%2FDIY%2520Turntable%2FIMG_0198_zpsv2p5rkyt.jpg&hash=251b7946c944e1647b0c85df322f6c3b)
Then, fixing an OroginLive DC motor, again with Plexiglas
![IMG_0197_zpsfaym40lx.jpg](/forum/proxy.php?image=http%3A%2F%2Fi27.photobucket.com%2Falbums%2Fc186%2Fteddy_pardo%2FDIY%2520Turntable%2FIMG_0197_zpsfaym40lx.jpg&hash=03011876fce11e62122983f51d75cb00)
![IMG_0196_zpsucz3btbq.jpg](/forum/proxy.php?image=http%3A%2F%2Fi27.photobucket.com%2Falbums%2Fc186%2Fteddy_pardo%2FDIY%2520Turntable%2FIMG_0196_zpsucz3btbq.jpg&hash=9250b82d308ed2d5d5f9f888fa4d9997)
Next, place the inner platter, left from a cirkus upgrade
![IMG_0195_zpss6rhnmzs.jpg](/forum/proxy.php?image=http%3A%2F%2Fi27.photobucket.com%2Falbums%2Fc186%2Fteddy_pardo%2FDIY%2520Turntable%2FIMG_0195_zpss6rhnmzs.jpg&hash=4b18b716b648f5e917cd962d6de515d6)
And an outer platter taken from an old Thorens TD160. The outer platter required some adaptation as the diameter and height are slightly different.
![IMG_0200_zpsr6le1rt0.jpg](/forum/proxy.php?image=http%3A%2F%2Fi27.photobucket.com%2Falbums%2Fc186%2Fteddy_pardo%2FDIY%2520Turntable%2FIMG_0200_zpsr6le1rt0.jpg&hash=e276ccdfbc69eaae5134d73b922150c5)
![IMG_0201_zps707aku8h.jpg](/forum/proxy.php?image=http%3A%2F%2Fi27.photobucket.com%2Falbums%2Fc186%2Fteddy_pardo%2FDIY%2520Turntable%2FIMG_0201_zps707aku8h.jpg&hash=299e0070f9e502578910ce2cde27e577)
Adding a Mat made of Silicone foil usually used for coocking
![IMG_0202_zpslqse8gab.jpg](/forum/proxy.php?image=http%3A%2F%2Fi27.photobucket.com%2Falbums%2Fc186%2Fteddy_pardo%2FDIY%2520Turntable%2FIMG_0202_zpslqse8gab.jpg&hash=abf22a63ec622c9f8a0821b554b33691)
And to finalize, a TangoSpinners record clamp
![IMG_0205_zpsen3ufth3.jpg](/forum/proxy.php?image=http%3A%2F%2Fi27.photobucket.com%2Falbums%2Fc186%2Fteddy_pardo%2FDIY%2520Turntable%2FIMG_0205_zpsen3ufth3.jpg&hash=29c975cf902fc23fa206adad7859bfcd)
![IMG_0204_zpsr0fcdbsb.jpg](/forum/proxy.php?image=http%3A%2F%2Fi27.photobucket.com%2Falbums%2Fc186%2Fteddy_pardo%2FDIY%2520Turntable%2FIMG_0204_zpsr0fcdbsb.jpg&hash=30097fa4a64a4346bae86682d5994cd5)
To the OriginLive I connected one of our power supplies to which I have added a trimmer for fine speed adjustment.
Sound is fantastic