[FS] DIY HiCap kit with Naim regs

[laverda]

Offered here first: I have the parts for someone to build a HiCap:

1 x Tiger Toroid 500va Primary 0-120 0-120, with 6 secondaries of 0-24. New unused
2 x 20amp 200v rectifier's (as used by Naim). New unused
2 x Kemet 20,000uF 100v (ALS70A). New unused
1 x Naim HiCap PSU module (Tested 100% working)

All you need is case and ancillaries, a bit of wiring and you'll end up with a great PSU

£120 the lot. Great xmas project.

+ shipping to UK mainland only

 

[Mosquito]

I have been reading about the B4 bootstrap preamp. I spotted that you had bought the boards some years ago. Did you ever get round to building them and what do you think? I am currently running a Naim NAC32.5 with Neil Jarden boards in them. I rather fancy a project but need to have it as an improvement on what I already have.
Best regards
Ivan

 

[laverda]

Hi Ivan,

Not sure how your question has anything to do with this classified posting...?

Yes I built one or two B4s back in the day and it's very good indeed, its not fussy on a power supply PSU, just use the one on board. I think the B4 may be an upgrade to Neils boards but Ive never tried Neils boards so cant comment. The only way to find out is to build the B4 and compare.

G

 

[Pirx]

Am I wrong assuming one can built a supercap with those bits ?

 

[laverda]

Am I wrong assuming one can built a supercap with those bits ?

Yes, you would need many more regulators for a supercap.

 

[laverda]

No longer available..