CALLING ALL PROJECT PERIPHERAL BELT OWNERS

[loheswaran]

I am posting this in the hope that somebody with a Project turntable that has a belt going around the circumference of their respective deck sees this post.
The reason for this was that I would be very grateful if the owner would kindly use a set of digital calipers to measure exactly in milimeters the 33 1/3 and 45 rpm pulleys. BTW this must be the 50hz ac motor versions.

thanks

Lohan

 

[MikeMA]

I am posting this in the hope that somebody with a Project turntable that has a belt going around the circumference of their respective deck sees this post.
The reason for this was that I would be very grateful if the owner would kindly use a set of digital calipers to measure exactly in milimeters the 33 1/3 and 45 rpm pulleys. BTW this must be the 50hz ac motor versions.

thanks

Lohan

Lohan

32 and 44 mm according to my calipers.

Mike

 

[loheswaran]

Thanks for that mike. Which deck have you got btw?

 

[MikeMA]

Thanks for that mike. Which deck have you got btw?

It's an RPM 9.1X, just like this

Mike

 

[loheswaran]

U star. Thanks