advertisement


Recent content by Ed Needham

  1. E

    Rega New Turntables

    The Rega Carbon is the only 'bought in' Rega cartridge, all the others are manufactured at the Rega factory in Southend.
  2. E

    Do Quadraspire 19mm and 32mm diameter uprights use same thread size?

    All QS legs are M12 thread so they will interchange. Ed.
  3. E

    Let Down By The Dealer

    This sounds to me like the rewiring/link cutting on the passive crossovers in the speakers has not been done correctly. There should be absolutely no connection between the treble unit and the bottom set of speaker terminals, but there seems to be. Ed.
  4. E

    Naim CDX2 Opinions?

    John, There are 2 Naim dealers in Chester, Acoustica and Adventures in HiFi. Go and have a listen to a CDX2 and then come over to Cheadle (about 40mins) and have a listen to the Linn Majik and the Accuphase DP-57. We had a lot of fun recently with a traded in CDX2, almost sad that it had to...
  5. E

    'Geddon style P/S for Pro-Jekt?

    I've been too close to Mad Steve for too long, obviously... :D Seriously though, my Pro-Jekt X-pack must be being seriously held back by this wall wart, so I have a desire to do something about it. Ed.
  6. E

    'Geddon style P/S for Pro-Jekt?

    I knew this subject would lose me - my background is mech eng, I can build a nice case to put it in... The wall wart connects to the turntable by means of a phone charger type plug, therefore I guess that any trickery re phase shifting is done in the turntable and all I would need is an...
  7. E

    'Geddon style P/S for Pro-Jekt?

    I've just been having a butchers at RichardH's thread on his DIY Geddon for the LP12 and wondered how easy it would be to come up with a P/S to replace the wall wart used to power Pro-Jekt turntables. The supplied wall wart is a 500mA, 16Vac jobby. RS seem to have a variety of toroids at...
  8. E

    rega kyte tweeter replacement

    Kytes do use a Vifa treble unit. They are fixed in place with a sticky Hylomrt type gasket sealant which needs a bit of force to break. The 2 wires are soldered. Simple job for anyone remotely capable. Rega have put spares prices up in recent times, but I'm guessing that you're looking at £25 or...
  9. E

    Linn Ninka Tweeters

    The Linn list price for the SPKR 015/5 is £68.74 each. The dealer's cut on spares is way lower than other kit, BTW. Darran - I'd check your invoice if I were you, I reckon you've sold them for more than £30 less than they cost you! Ed.
  10. E

    Worst cover version ever?

    Madonna's version of Don't Cry for me Argentina - she clearly has no understanding of the English in lyrics like 'dressed up to the nines, at sixes and sevens with you' and 'down at heel', and doesn't appear to have bothered to find out. Almost certainly not the worst, but 'kin irritating! Ed.
  11. E

    Bob Dylan doesn't like SACD?

    We have a customer who reported last week that he couldn't get Dylan SACD layers to read - seems like it could be a faulty batch of discs (unless of course our chap & Bald Eagle are the same person.... ) Ed.
  12. E

    Tuner Repairs?

    Simon, The guy who does some of our repairs is a Revox service agent, I know that he specialises in the reel to reel tape decks, but he is pretty clued up generally. Contact details: Brian Reeves, 0161 499 2349. He's dead slow, not cheap, but very good. I know that you are looking...


advertisement


Back
Top