I have a brand new sealed in the box ZYX R50 "H" Bloom 3 MC cartridge fitted with at the TB head shell for optimum performance. H = high output (0.48mV)
Special Rigid Black Aluminium Cantilever
Normally the sound of aluminium is very natural, but cannot follow to high frequency perfectly. In order to achieve both its characteristic natural sound and the wide range reproduction, the R50 Bloom 3 has a newly developed rigid aluminium cantilever for the first time.
Cartridge Case For REAL STEREO
Item 11,12 and 13 of the vital design points make very complex demand of the body’s electrical properties. The non-metallic body is necessary in order to achieve these properties and to prevent external disturbances from influencing the generator system and also, it prevents eddy currents in the case from effecting the generator output signal.
Stylus
The stylus used in the R50 Bloom 3 is the line-contact stylus which can playback up to 40 kHz. And also it has the edges of the diamond shank set parallel to the sides of the cantilever. Using this type of stylus, the hardest axis of the crystal is aligned to act as the contact point with the record groove. This gives stable and smooth tracing and produces a very refined sound, with the additional benefit of giving the stylus an extended life.
Super High-speed reproduction engine (magnetic circuit)
This circuit is specially processed to null magnetic resistance within the magnetic gap and enables high-speed power generation against signals over entire bandwidth straightly without time delay.
Spec:
Type Moving Coil (Dynamic) “REAL STEREO” Generator System
Cryogenic Treatment Temperature: -196 ℃ (-320оF)
Output Voltage 0.48mV (3.54cm/sec, 1kHz)
Frequency Response ±1dB 10 Hz - 100 kHz 20 Hz - 20 kHz
Channel Separation ＞ 30dB 〔 1kHz 〕
Channel Balance ＜ 0.5dB 〔 1kHz 〕
Recommended Tracking Force 2.0gm 〔 20 ゜C-25 ゜C 〕
Tracking Force Range 1.7gm - 2.5gm
Trackability ＞60μm /2.0gm
EQ Compliance horizontal 15×10-6cm/dyne
EQ Compliance horizontal vertical 12×10-6cm/dyne
Internal Impedance 8.0 Ω
Load Impedance ＞ 100Ω
Coil Wire 6N OFCφ0.035mm
Net Weight 7.7gm (TB)
Price: R50 Bloom 3 H = £850 + TB headshell (£160) = £1010
Special price - £800
Special Rigid Black Aluminium Cantilever
Normally the sound of aluminium is very natural, but cannot follow to high frequency perfectly. In order to achieve both its characteristic natural sound and the wide range reproduction, the R50 Bloom 3 has a newly developed rigid aluminium cantilever for the first time.
Cartridge Case For REAL STEREO
Item 11,12 and 13 of the vital design points make very complex demand of the body’s electrical properties. The non-metallic body is necessary in order to achieve these properties and to prevent external disturbances from influencing the generator system and also, it prevents eddy currents in the case from effecting the generator output signal.
Stylus
The stylus used in the R50 Bloom 3 is the line-contact stylus which can playback up to 40 kHz. And also it has the edges of the diamond shank set parallel to the sides of the cantilever. Using this type of stylus, the hardest axis of the crystal is aligned to act as the contact point with the record groove. This gives stable and smooth tracing and produces a very refined sound, with the additional benefit of giving the stylus an extended life.
Super High-speed reproduction engine (magnetic circuit)
This circuit is specially processed to null magnetic resistance within the magnetic gap and enables high-speed power generation against signals over entire bandwidth straightly without time delay.
Spec:
Type Moving Coil (Dynamic) “REAL STEREO” Generator System
Cryogenic Treatment Temperature: -196 ℃ (-320оF)
Output Voltage 0.48mV (3.54cm/sec, 1kHz)
Frequency Response ±1dB 10 Hz - 100 kHz 20 Hz - 20 kHz
Channel Separation ＞ 30dB 〔 1kHz 〕
Channel Balance ＜ 0.5dB 〔 1kHz 〕
Recommended Tracking Force 2.0gm 〔 20 ゜C-25 ゜C 〕
Tracking Force Range 1.7gm - 2.5gm
Trackability ＞60μm /2.0gm
EQ Compliance horizontal 15×10-6cm/dyne
EQ Compliance horizontal vertical 12×10-6cm/dyne
Internal Impedance 8.0 Ω
Load Impedance ＞ 100Ω
Coil Wire 6N OFCφ0.035mm
Net Weight 7.7gm (TB)
Price: R50 Bloom 3 H = £850 + TB headshell (£160) = £1010
Special price - £800