Graham,
Andy Weekes posted this in the Reference section:
http://www.duncanamps.com/psud2/index.html
Jo
Thanks for replies. So with 22mA drawn by the front ends, mine are at 77mA total. I’ll try taking the current up to 130mA = 152 mA equivalent for un-split power rail bias.
As a competent DIY'er it shouldn't be too difficult to rotate the temperature dial relative to the control - about 6C difference should do the trick.Be handy for testing the accuracy of the central heating thermostat that. Another weapon in the battle against excessive usage. Can you get a holster for it?
If only it was so simple, we've gone all Hive now - different skill set. Having said that, I can now switch it off from the other side of the world if I wantAs a competent DIY'er it shouldn't be too difficult to rotate the temperature dial relative to the control - about 6C difference should do the trick.
Don't tell the other half about expectation bias though