Hallo guys.
Yesterday I fully recapped (tants and reservoir caps) a NAP 140 and after the bias check I found an offset voltage of about 3.2V on the right channel.
The bias is set to 7mV read on the green resistors on the left and the right channel.
What is wrong, any idea?
Thank you in advance for your help.
Guido.
Yesterday I fully recapped (tants and reservoir caps) a NAP 140 and after the bias check I found an offset voltage of about 3.2V on the right channel.
The bias is set to 7mV read on the green resistors on the left and the right channel.
What is wrong, any idea?
Thank you in advance for your help.
Guido.