XLRs to naim DIN

[Jack Barriere]

Is this the proper way to wire 2 XLRs out puts to 1 5 pin din naim input. Or do I float the shield on the Din side. Posted this on the naim site and no reply. Sorry for the crapy pic.
http://img535.imageshack.us/img535/3153/1006557.jpg

This is the cable I will use to see how it sounds.
http://img11.imageshack.us/img11/2802/1006560z.jpg

Thank You
Jack

 

[S_J]

You need pin 3 on the XLRs connected to pin 3 of the DIN. And I think the shields should also connect to DIN pin 3 too (or at least, that's how Neutrik wire their XLR-RCA adaptor so should work).

 

[natzev_i]

I don't know what kind of DAC you use but I think you should better go with something like this:
http://www.twistedpearaudio.com/linestages/ballsie.aspx

 

[Jack Barriere]

After some fun on the Naim forum. This is how you get a Dacmagic to sing with a Naim nait.
http://www.facebook.com/album.php?aid=2111879&id=1217006445&l=5985f6c060

 

[Jack Barriere]

All of 2 seconds to figure out pin location on this. #2 sure makes you want to try this option EH

http://img560.imageshack.us/img560/5020/1006663.jpg