advertisement


Time for a new PC

user@Revo:~$ ls -l /etc/init
total 348
-rw-r--r-- 1 root root 320 Dec 8 2011 acpid.conf
-rw-r--r-- 1 root root 268 Apr 4 05:08 alsa-restore.conf
-rw-r--r-- 1 root root 267 Apr 4 05:08 alsa-store.conf
-rw-r--r-- 1 root root 278 Jun 20 2010 anacron.conf
-rw-r--r-- 1 root root 1309 Apr 18 09:20 apport.conf
-rw-r--r-- 1 root root 261 Oct 25 2011 atd.conf
-rw-r--r-- 1 root root 541 Oct 18 2011 avahi-daemon.conf
-rw-r--r-- 1 root root 1009 Mar 7 20:04 bluetooth.conf
-rw-r--r-- 1 root root 266 Apr 16 17:00 console.conf
-rw-r--r-- 1 root root 509 Dec 21 2010 console-setup.conf
-rw-r--r-- 1 root root 1122 Apr 16 17:00 container-detect.conf
-rw-r--r-- 1 root root 356 Apr 16 17:04 control-alt-delete.conf
-rw-r--r-- 1 root root 297 Apr 2 10:55 cron.conf
-rw-r--r-- 1 root root 1814 Apr 10 07:53 cups.conf
-rw-r--r-- 1 root root 7 Aug 30 20:08 cups.override
-rw-r--r-- 1 root root 510 Jan 10 2012 dbus.conf
-rw-r--r-- 1 root root 273 Mar 30 18:10 dmesg.conf
-rw-r--r-- 1 root root 1377 Apr 16 17:00 failsafe.conf
-rw-r--r-- 1 root root 380 Aug 30 2011 failsafe-x.conf
-rw-r--r-- 1 root root 267 Apr 16 17:00 flush-early-job-log.conf
-rw-r--r-- 1 root root 1247 Mar 14 13:56 friendly-recovery.conf
-rw-r--r-- 1 root root 1985 Mar 27 18:40 gssd.conf
-rw-r--r-- 1 root root 317 May 26 2011 hostname.conf
-rw-r--r-- 1 root root 557 Mar 30 06:31 hwclock.conf
-rw-r--r-- 1 root root 444 Mar 30 06:31 hwclock-save.conf
-rw-r--r-- 1 root root 131 Apr 6 17:18 hybrid-gfx.conf
-rw-r--r-- 1 root root 976 Mar 27 18:40 idmapd.conf
-rw-r--r-- 1 root root 571 Feb 4 2012 irqbalance.conf
-rw-r--r-- 1 root root 1413 Apr 19 22:39 lightdm.conf
-rw-r--r-- 1 root root 349 Mar 24 12:41 modemmanager.conf
-rw-r--r-- 1 root root 367 Mar 18 2011 module-init-tools.conf
-rw-r--r-- 1 root root 943 Apr 12 22:30 mountall.conf
-rw-r--r-- 1 root root 349 Apr 12 22:30 mountall-net.conf
-rw-r--r-- 1 root root 261 Apr 12 22:30 mountall-reboot.conf
-rw-r--r-- 1 root root 1201 Apr 12 22:30 mountall-shell.conf
-rw-r--r-- 1 root root 405 Apr 12 22:30 mounted-debugfs.conf
-rw-r--r-- 1 root root 550 Apr 12 22:30 mounted-dev.conf
-rw-r--r-- 1 root root 480 Apr 12 22:30 mounted-proc.conf
-rw-r--r-- 1 root root 610 Apr 12 22:30 mounted-run.conf
-rw-r--r-- 1 root root 1890 Apr 12 22:30 mounted-tmp.conf
-rw-r--r-- 1 root root 903 Apr 12 22:30 mounted-var.conf
-rw-r--r-- 1 root root 388 Apr 5 01:26 networking.conf
-rw-r--r-- 1 root root 803 Apr 5 01:24 network-interface.conf
-rw-r--r-- 1 root root 523 Apr 5 01:24 network-interface-container.conf
-rw-r--r-- 1 root root 1603 Apr 5 01:24 network-interface-security.conf
-rw-r--r-- 1 root root 568 May 25 02:02 network-manager.conf
-rw-r--r-- 1 root root 971 Nov 9 2011 plymouth.conf
-rw-r--r-- 1 root root 326 Mar 26 2010 plymouth-log.conf
-rw-r--r-- 1 root root 899 Mar 18 2011 plymouth-splash.conf
-rw-r--r-- 1 root root 800 Apr 13 12:04 plymouth-stop.conf
-rw-r--r-- 1 root root 367 Jan 25 2011 plymouth-upstart-bridge.conf
-rw-r--r-- 1 root root 853 May 30 17:14 portmap.conf
-rw-r--r-- 1 root root 805 May 30 17:14 portmap-wait.conf
-rw-r--r-- 1 root root 363 Dec 5 2011 procps.conf
-rw-r--r-- 1 root root 454 Apr 16 17:04 rc.conf
-rw-r--r-- 1 root root 705 Apr 16 17:00 rcS.conf
-rw-r--r-- 1 root root 1543 Apr 16 17:04 rc-sysinit.conf
-rw-r--r-- 1 root root 457 Mar 29 21:37 resolvconf.conf
-rw-r--r-- 1 root root 597 Mar 22 20:52 rfkill-restore.conf
-rw-r--r-- 1 root root 469 Mar 22 20:47 rfkill-store.conf
-rw-r--r-- 1 root root 209 May 30 17:14 rpcbind-boot.conf
-rw-r--r-- 1 root root 7 Aug 30 20:08 rpcbind-boot.override
-rw-r--r-- 1 root root 426 Mar 30 18:10 rsyslog.conf
-rw-r--r-- 1 root root 230 Mar 18 2011 setvtrgb.conf
-rw-r--r-- 1 root root 277 Apr 16 17:00 shutdown.conf
-rw-r--r-- 1 root root 210 Sep 1 09:46 squeezeslave.conf
-rw-r--r-- 1 root root 1188 Mar 27 18:40 statd.conf
-rw-r--r-- 1 root root 738 Mar 27 18:40 statd-mounting.conf
-rw-r--r-- 1 root root 7 Aug 30 20:09 statd.override
-rw-r--r-- 1 root root 348 Apr 16 17:00 tty1.conf
-rw-r--r-- 1 root root 333 Apr 16 17:00 tty2.conf
-rw-r--r-- 1 root root 333 Apr 16 17:00 tty3.conf
-rw-r--r-- 1 root root 333 Apr 16 17:00 tty4.conf
-rw-r--r-- 1 root root 232 Apr 16 17:00 tty5.conf
-rw-r--r-- 1 root root 232 Apr 16 17:00 tty6.conf
-rw-r--r-- 1 root root 322 Dec 16 2011 udev.conf
-rw-r--r-- 1 root root 637 Apr 5 00:55 udev-fallback-graphics.conf
-rw-r--r-- 1 root root 769 Aug 22 2011 udev-finish.conf
-rw-r--r-- 1 root root 356 Sep 29 2011 udevmonitor.conf
-rw-r--r-- 1 root root 352 Apr 5 00:26 udevtrigger.conf
-rw-r--r-- 1 root root 473 Apr 5 19:16 ufw.conf
-rw-r--r-- 1 root root 329 Apr 16 17:04 upstart-socket-bridge.conf
-rw-r--r-- 1 root root 553 Apr 16 17:04 upstart-udev-bridge.conf
-rw-r--r-- 1 root root 889 Feb 4 2012 ureadahead.conf
-rw-r--r-- 1 root root 683 Feb 4 2012 ureadahead-other.conf
-rw-r--r-- 1 root root 1481 Apr 16 17:00 wait-for-state.conf
-rw-r--r-- 1 root root 362 Apr 18 13:22 whoopsie.conf
user@Revo:~$
​

sudo jobs-admin shows
webmin
Type - system V
Starts on run levels 2,3,5
Stops on run levels 1,0,4,6
Status - running

Active in current run level (2)
Active on run level 3
Active on run level 5
Mode - automatic
Click to expand...
 
Maybe nothing to do with the problem but recently the system asks for a further login password following boot. Previously it just booted into the GUI, now the Gui starts and works but an input box asks for something like
login keyring token, I enter normal password.

I also took the -D (squeezeslave as a daemon.) from the webmin file, webmin is now

# squeezeslave
#
# squeezeslave upstart service

description "squeezeslave upstartservice"

start on runlevel [2345]
stop on runlevel [!2345]

expect fork

exec /home/user/squeezeslave/bin/squeezeslave -F -v off
Click to expand...

Sometimes squeezeslave starts on boot and is in LMS, all players are synchronised, and squeezeslave plays / pauses all players but no sound.

Other times stopping and starting within webmin achieves the same result but again no sound.

Terminal output is

user@Revo:~$ cat /etc/init/squeezeslave.conf
# squeezeslave
#
# squeezeslave upstart service

description "squeezeslave upstartservice"

start on runlevel [2345]
stop on runlevel [!2345]

expect fork

exec /home/user/squeezeslave/bin/squeezeslave -F -v off
user@Revo:~$
Click to expand...

Terminal command always gets squeezeslave working regardless of webmin stop / start
 
It's hard to tell what the problem is without any error messages but I'm wondering if the job is being run too early (possibly networking need to be up and running). So you could try:

sudo gedit /etc/init/squeezeslave.conf

comment out the following line (put a # in front of it):

start on runlevel [2345]

then add this line:

start on started networking

(also comment out the "expect fork" line if you have removed the -M from the squeezeslave parameters)

then give it a try by rebooting.

If it still isn't working correctly try running:

sudo grep init /var/log/syslog

there will be too much output to post here, but have a look and see if you can see anything relating to squeezeslave.
 
start on started networking did nothing much at all.
I changed it back.

Not much output timed at the last reboot, its all here.
Some in green probably not squeeze related but may be my monitor problem.
Squeeze related in red.
Sep 1 20:54:54 Revo kernel: [ 0.000000] initial memory mapped : 0 - 20000000
Sep 1 20:54:54 Revo kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000aff00000
Sep 1 20:54:54 Revo kernel: [ 0.000000] init_memory_mapping: 0000000100000000-000000013f000000
Sep 1 20:54:54 Revo kernel: [ 0.000000] Memory: 3751084k/5226496k available (6555k kernel code, 1317988k absent, 157424k reserved, 6645k data, 920k init)
Sep 1 20:54:54 Revo kernel: [ 0.004057] Security Framework initialized
Sep 1 20:54:54 Revo kernel: [ 0.004087] AppArmor: AppArmor initialized
Sep 1 20:54:54 Revo kernel: [ 0.156651] devtmpfs: initialized
Sep 1 20:54:54 Revo kernel: [ 0.162087] Trying to unpack rootfs image as initramfs...
Sep 1 20:54:54 Revo kernel: [ 0.248714] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
Sep 1 20:54:54 Revo kernel: [ 0.249178] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
Sep 1 20:54:54 Revo kernel: [ 0.319274] SCSI subsystem initialized
Sep 1 20:54:54 Revo kernel: [ 0.345261] pnp: PnP ACPI init
Sep 1 20:54:54 Revo kernel: [ 0.665979] Freeing initrd memory: 13876k freed
Sep 1 20:54:54 Revo kernel: [ 0.705654] audit: initializing netlink socket (disabled)
Sep 1 20:54:54 Revo kernel: [ 0.705682] type=2000 audit(1346529261.704:1): initialized
Sep 1 20:54:54 Revo kernel: [ 0.794785] fuse init (API version 7.17)
Sep 1 20:54:54 Revo kernel: [ 1.179712] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
Sep 1 20:54:54 Revo kernel: [ 30.745409] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
Sep 1 20:54:54 Revo kernel: [ 30.781801] IR NEC protocol handler initialized
Sep 1 20:54:54 Revo kernel: [ 30.795414] IR RC5(x) protocol handler initialized
Sep 1 20:54:54 Revo kernel: [ 30.813581] IR RC6 protocol handler initialized
Sep 1 20:54:54 Revo kernel: [ 30.832992] IR JVC protocol handler initialized
Sep 1 20:54:54 Revo kernel: [ 30.884104] IR Sony protocol handler initialized
Sep 1 20:54:54 Revo kernel: [ 30.949726] IR MCE Keyboard/mouse protocol handler initialized
Sep 1 20:54:54 Revo kernel: [ 30.972956] IR LIRC bridge handler initialized
Sep 1 20:54:54 Revo kernel: [ 32.558032] init: failsafe main process (699) killed by TERM signal
Sep 1 20:54:54 Revo kernel: [ 32.888661] Bluetooth: HCI device and connection manager initialized
Sep 1 20:54:54 Revo kernel: [ 32.888668] Bluetooth: HCI socket layer initialized
Sep 1 20:54:54 Revo kernel: [ 32.888671] Bluetooth: L2CAP socket layer initialized
Sep 1 20:54:54 Revo kernel: [ 32.893976] Bluetooth: SCO socket layer initialized
Sep 1 20:54:54 Revo kernel: [ 32.985426] Bluetooth: RFCOMM TTY layer initialized
Sep 1 20:54:54 Revo kernel: [ 32.985440] Bluetooth: RFCOMM socket layer initialized
Sep 1 20:54:54 Revo NetworkManager[784]: SCPlugin-Ifupdown: init!
Sep 1 20:54:54 Revo NetworkManager[784]: SCPlugin-Ifupdown: end _init.
Sep 1 20:54:55 Revo kernel: [ 34.030254] init: squeezeslave main process (1028) terminated with status 255
Sep 1 20:54:56 Revo NetworkManager[784]: <info> (eth0): DHCPv4 state changed nbi -> preinit
Sep 1 20:54:56 Revo NetworkManager[784]: <info> (eth0): DHCPv4 state changed preinit -> reboot
Sep 1 20:54:59 Revo kernel: [ 37.819315] init: plymouth-stop pre-start process (1457) terminated with status 1
user@Revo:~$
Click to expand...
 
Found a solution.
Under the gear wheel top right of desktop (system?)
Startup applications
I found I could just enter the script
/home/user/squeezeslave/bin/squeezeslave -M -F -v off
I think its saved somewhere in ect/

Three successful boots so far

May have been able to use below from here

To install your own script, copy it to /etc/init.d, and make it executable.

sudo cp myscript /etc/init.d
sudo chmod +x /etc/init.d/myscript

To make the script run with the start argument at the end of the start sequence, and run with the stop argument at the beginning of the shutdown sequence:

sudo update-rc.d myscript defaults 98 02

98 and 02 are the start and stop sequence numbers respectively. Both are numbers between 00 and 99 and specify how early or late a service is started or killed. If a service is started late, it should be killed early and vice-versa. A good rule of thumb is to make the stop sequence number equal to 100 minus the start sequence number.

For more information on the usage of update-rc.d

man update-rc.d
Click to expand...

Thanks again for your help
 
You must log in or register to reply here.


advertisement


Back
Top