I've just put one of these in my dac, currently using a single board to power wavio, toslink receiver, spdif>i2s board, i2s switch and curryman dac. Single 5v output is powering all the digital stuff and 15v bipolar output on the curryman output stage. Replaced two largish linear supplies with hynes shunt regs. Something relatively trivial for me to get back into doing diy before starting on the qudos build. Currently running it off a 5v mains usb charger. Tried a usb power block but the waveio current draw runs that down too quickly. Tempted to get a 2nd board to run separate supplies to different parts, especially as the new boards can have the bipolar output down to 5v and supply enough current to run the waveio.
Anyone else used these? Be interested to hear experiences. I did note JohnW mentioned there's not great HF noise filtering, so would be interested to know if putting a usb noise cleaner on the supply would offer any improvement.