TeddyPardo Updated Forum Links

[JimmyB]

I was looking for some info on Teddyregs and the links from his website weren't working. I've updated these along with his website descriptions below to working links in the hope they may still be useful to others as well:


General Tips and Tricks:

DIY SMT to DIL adapter
Explains how to build a simple adapter to solder SMT opamps on a DIL PCB.
https://pinkfishmedia.net/forum/showthread.php?t=22383

Regulator Booster
Improve the performance of a 317 regulator by adding a Gyrator front end. A miniature strip board that can be used as a prop-in replacement to the 317
https://pinkfishmedia.net/forum/showthread.php?t=23208​

Naim CDX Modifications

Pictures (preview) of my very modified CDX - Some ideas for CDX modifications
https://pinkfishmedia.net/forum/showthread.php?t=23281

CDX reverse engineering
Details regarding the CDX internals
https://pinkfishmedia.net/forum/showthread.php?t=23047​

TeddyReg and PowerReg:

The best regulator I've built so far - The first TeddyReg thread
https://pinkfishmedia.net/forum/showthread.php?t=36174

Howto: TeddyReg
The first TeddyReg thread became long and too difficult to follow, this one was supposed to be shorter...
https://pinkfishmedia.net/forum/showthread.php?t=39990

Howto: accelerated TeddyReg
How to accelerate the start time of the TeddyReg
https://pinkfishmedia.net/forum/showthread.php?t=50718

Introducing the PowerReg
A regulator for power amplifiers
https://pinkfishmedia.net/forum/showthread.php?t=39306

Howto: TeddyCap
Building a CRCRC network for the TeddyReg
https://pinkfishmedia.net/forum/showthread.php?t=50437

SuperReg (ALWSR) Modifications:
Replacing the ALWSR's pre-regulator by a VBE - The TeddyCap history
https://pinkfishmedia.net/forum/showthread.php?t=21574​

Naim Phono Stage Modifications:

Pictures of my new phono pre-amp - Modifications to Naim phono stage, including regulators
https://pinkfishmedia.net/forum/showthread.php?t=22155​

NCC200 Modifications:

Regulating NCC200 front end, and other tips - >Adding a front end regulator to Avondale NCC200 power amplifier, applicable also to Naim power amplifiers.
https://pinkfishmedia.net/forum/showthread.php?t=20798​

 

[sam_cat]

Keep meaning to buildup a couple of Powerregs..

 

[al2002]

Thanks JimmyB, saves us a lot of time and effort.

 

[Mynamemynaim]

Great work Jimmy
Much appreciated

 

[Alan Chung]

Thanks Jimmy. Not sure if it’s me but for the last few weeks I’ve found the threads I have bookmarked can’t be opened again. They only take me to the home page. Likewise, the links embedded in threads for referencing also do the same. Do other people have similar experience?

 

[Jo Sharp]

Thanks for putting this together. I'll make a link in the Reference information forum.

 

[al2002]

Yes, I have the same problem. Looking at the full URLs, there seems to have been a change in the way threads are tracked and organised. The old system assigned each thread a number, now threads are named. e.g.->

Old: http://www.pinkfishmedia.net/forum/showthread.php?t=22383

New: https://pinkfishmedia.net/forum/threads/diy-smt-to-dil-adapter-like-brown-dog.22383/
https://pinkfishmedia.net/forum/threads/diy-smt-to-dil-adapter-like-brown-dog.22383/
Not sure why the change was made. Perhaps TonyL can chime in?

 

[jpk]

Using pinkfishmedia.net/forum/threads/123456789 works for me: just replace "123456789" with the thread number of the old forum links, for example:

https://pinkfishmedia.net/forum/threads/22383

(it could be possible to have a php redirect us to the new style URL so that we can find everything easily...)

 

[JimmyB]

SuperTeddyReg was missing...thread here:

SuperTeddyReg
https://pinkfishmedia.net/forum/threads/teddyreg-upgrade-or-a-superteddyreg.61445/

 

[yairf]

Thank you so much for this!
Will be included in our new (and upcoming) website.