advertisement


System Pics 2021

Status
Not open for further replies.
The last part of my system, a custom made music server, arrived and was personally installed by the man who built it for me – Lukasz Domansky of Lukasz Audio Labs. I was very grateful for this as not only did he tune the set up to the room and other components, but he fixed a number of cable compatibility issues between the server and the DAC that prevented playback. I guess this is one of the downsides to buying esoteric, small volume custom built equipment, but the upside is music far beyond what a mainstream product at the same price point could ever hope to give you.

IMG_0251 by Greg Turner, on Flickr

To give you some sort of context as to how good the server is, I had been trying a Silvercore Whanfried Edition line stage pre-amp. This is a special beast, fully silver monocrystal wiring throughout and very expensive (£24k via G-Point Audio). It was quite special and lifted the dynamics, soundstage, detail and overall musicality of my system to a heart breaking level. I’m not sure why I even agreed to listen to it as currently, now the system I have is bought and paid for, there is nothing left to finance anything more than what I have. And that’s OK because what I have is wonderful. But still, I found myself musing that just when I should be enjoying a decent bump in engagement and enjoyment with the arrival of the server, I found myself thinking that the departure of the pre-amp would be by far the greater wrench and the server would be simply trying to limit the loss, a task I didn’t expect it to do especially well. Afterall, how much better could this server be over the Macbook Pro I’d been using until then?

The answer is that the server didn’t just limit the loss of the pre-amp, it almost exceeded the improvement that the pre-amp had made. The experience is revelatory, astounding, superlative.

IMG_0249 by Greg Turner, on Flickr

The server, which usually retails for £6,900, was built for me to a budget of around £3k so has some significant performance downgrades. It is sort of a LDMS Pico built into a Mini case with some hot rodded hardware that allows it to run Roon as a Core (the Pico doesn’t have the horsepower to do this). It’s hard to say how much it really cost because it was a package deal – Lukasz’s FP10 speakers and the server for £5k; I don’t know the second hand value of the FP10s as I don’t think they sell often if at all on the second hand market but even if I had paid £7k for this server I would have been exceptionally happy, and keep in mind that the ‘off the shelf’ LDMS Mini does have some major performance upgrades on top of the one I have and is the reason it retails for a shade under £7k.

IMG_0247 by Greg Turner, on Flickr

The server runs Roon as a core but Lukasz prefers the way HQ Player handles the files and passes them to the DAC. I can run either Roon or HQP but so far have not switched to Roon as the HQP output is sublime.

I cannot sing Lukasz’s praises highly enough. Yes I waited a very long time for the server and his management of time and expectations became something almost comical as one reason for a delay after another was offered, but I always had the sense that he was a genuine guy, truly passionate about music and building amazing servers that just sing like a nightingale. Even then, the wait time wasn’t that bad – ordered and paid for in January and delivered just last week. OK so twice as long as you might expect from a major brand from order to delivery, but the sound quality is equally as excessive. It really is quite magical.

IMG_0248 by Greg Turner, on Flickr

The complete and final system is thus as follows:

IMG_0253 by Greg Turner, on Flickr

- Lukasz Audio Lab custom built LDMS Mini server with Ideon Audio internal re-clocker, separate PSU and David Laboga interconnect between the PSU and server. The software is a custom stripped back Window OS tuned by Lukasz himself.

- Final Cut USB cable, custom made to Lukasz’s specs; the earthing arrangement in the DAC was causing problems with cable compatibility and none of the David Laboga cables would work but the one built by Lukasz works flawlessly and sounds superb

- Lampizator Golden Gate DAC with single ended 300B output tubes

- High Fidelity CT-1 Ultimate RCA interconnect – 5m runs from the DAC to the amps

- Silvercore 833c monobloc SET amps; 20W, hand wound silver output transformers sitting on Rogoz isolation tables

- High Fidelity CT-1 speaker cables

- Horns FP10s with internal silver wiring upgrade and matching Rogoz stands – the speakers are 30kg each, the stands are 45kg!

- Grapite Audio isolation cones under the DAC and between the speakers and stands and Graphic Audio pucks between the stands and the floor

- ProAudio Bono suspension table

- Some more Polish made kit that didn’t cost a lot and look just like sound diffusers; these are yet to be mounted onto the wall. For the money (£400) they are an easy upgrade to say yes to.

IMG_0254 by Greg Turner, on Flickr

The total spend is, being honest, an appreciable fraction of my mortgage. But this was the promise I made to myself after my marriage broke down and during the years of being very unhappy in that union and not being able/allowed to listen to music (indeed obliged to sell my Naim kit), I said I would put aside that fraction to buy a dream system. The room is the limiting factor, but the true near field listening position and sheer musicality of the overall presentation is far beyond what I would have thought possible from the budget.

If anyone would like to have a listen, I am in West Sussex and would be very happy to host you.

IMG_0247 by Greg Turner, on Flickr
Fab system and room. I even like the colour.
 
New addition of a Rega P8 and Hana ML cartridge.

jlUQkzb.jpg


JSLXXOV.jpg


ON8YBno.jpg


JlddaJI.jpg
Nice looking set up. Do you require a spacer for the Hana ML? If so 2mm? or greater? What do you think of the Iso Gaii feet?
 
Nice looking set up. Do you require a spacer for the Hana ML? If so 2mm? or greater? What do you think of the Iso Gaii feet?

Thanks Conster. I did t at first but I have added 2.5 mm using Acoustic Signature spacer and think it helps.

I love the Isoacoustics feet, they were a very big upgrade. There are a lot of similar views on this and other forums. Not sure I know of anyone who has had a positive experience with them.
 
The last part of my system, a custom made music server, arrived and was personally installed by the man who built it for me – Lukasz Domansky of Lukasz Audio Labs. I was very grateful for this as not only did he tune the set up to the room and other components, but he fixed a number of cable compatibility issues between the server and the DAC that prevented playback. I guess this is one of the downsides to buying esoteric, small volume custom built equipment, but the upside is music far beyond what a mainstream product at the same price point could ever hope to give you.

IMG_0251 by Greg Turner, on Flickr

To give you some sort of context as to how good the server is, I had been trying a Silvercore Whanfried Edition line stage pre-amp. This is a special beast, fully silver monocrystal wiring throughout and very expensive (£24k via G-Point Audio). It was quite special and lifted the dynamics, soundstage, detail and overall musicality of my system to a heart breaking level. I’m not sure why I even agreed to listen to it as currently, now the system I have is bought and paid for, there is nothing left to finance anything more than what I have. And that’s OK because what I have is wonderful. But still, I found myself musing that just when I should be enjoying a decent bump in engagement and enjoyment with the arrival of the server, I found myself thinking that the departure of the pre-amp would be by far the greater wrench and the server would be simply trying to limit the loss, a task I didn’t expect it to do especially well. Afterall, how much better could this server be over the Macbook Pro I’d been using until then?

The answer is that the server didn’t just limit the loss of the pre-amp, it almost exceeded the improvement that the pre-amp had made. The experience is revelatory, astounding, superlative.

IMG_0249 by Greg Turner, on Flickr



IMG_0247 by Greg Turner, on Flickr

The server runs Roon as a core but Lukasz prefers the way HQ Player handles the files and passes them to the DAC. I can run either Roon or HQP but so far have not switched to Roon as the HQP output is sublime.

I cannot sing Lukasz’s praises highly enough. Yes I waited a very long time for the server and his management of time and expectations became something almost comical as one reason for a delay after another was offered, but I always had the sense that he was a genuine guy, truly passionate about music and building amazing servers that just sing like a nightingale. Even then, the wait time wasn’t that bad – ordered and paid for in January and delivered just last week. OK so twice as long as you might expect from a major brand from order to delivery, but the sound quality is equally as excessive. It really is quite magical.

IMG_0248 by Greg Turner, on Flickr

The complete and final system is thus as follows:

IMG_0253 by Greg Turner, on Flickr

- Lukasz Audio Lab custom built LDMS Mini server with Ideon Audio internal re-clocker, separate PSU and David Laboga interconnect between the PSU and server. The software is a custom stripped back Window OS tuned by Lukasz himself.

- Final Cut USB cable, custom made to Lukasz’s specs; the earthing arrangement in the DAC was causing problems with cable compatibility and none of the David Laboga cables would work but the one built by Lukasz works flawlessly and sounds superb

- Lampizator Golden Gate DAC with single ended 300B output tubes

- High Fidelity CT-1 Ultimate RCA interconnect – 5m runs from the DAC to the amps

- Silvercore 833c monobloc SET amps; 20W, hand wound silver output transformers sitting on Rogoz isolation tables

- High Fidelity CT-1 speaker cables

- Horns FP10s with internal silver wiring upgrade and matching Rogoz stands – the speakers are 30kg each, the stands are 45kg!

- Grapite Audio isolation cones under the DAC and between the speakers and stands and Graphic Audio pucks between the stands and the floor

- ProAudio Bono suspension table

- Some more Polish made kit that didn’t cost a lot and look just like sound diffusers; these are yet to be mounted onto the wall. For the money (£400) they are an easy upgrade to say yes to.

IMG_0254 by Greg Turner, on Flickr

The total spend is, being honest, an appreciable fraction of my mortgage. But this was the promise I made to myself after my marriage broke down and during the years of being very unhappy in that union and not being able/allowed to listen to music (indeed obliged to sell my Naim kit), I said I would put aside that fraction to buy a dream system. The room is the limiting factor, but the true near field listening position and sheer musicality of the overall presentation is far beyond what I would have thought possible from the budget.

If anyone would like to have a listen, I am in West Sussex and would be very happy to host you.

IMG_0247 by Greg Turner, on Flickr
Holy moly, that looks cool… definitely looks expensive too, but it has to be a much better investment than an unhappy marriage. Fair play to you!
 
Finally received my silver clock. Its all a bit low-down because my pre-amp has gone back to Halcro in Oz for new relays / caps and a general do-over.
Using the DAC direct into the power amps and it sounds mighty fine.

IMG-6738.jpg


The rest of it

IMG-6740.jpg


Visitors welcome....double vaccination certificate only pls :D
 
Finally received my silver clock. Its all a bit low-down because my pre-amp has gone back to Halcro in Oz for new relays / caps and a general do-over.
Using the DAC direct into the power amps and it sounds mighty fine.

IMG-6738.jpg


The rest of it

IMG-6740.jpg


Visitors welcome....double vaccination certificate only pls :D

Very HG Wells Time Machine....
 
Finally received my silver clock. Its all a bit low-down because my pre-amp has gone back to Halcro in Oz for new relays / caps and a general do-over.
Using the DAC direct into the power amps and it sounds mighty fine.

IMG-6738.jpg


The rest of it

IMG-6740.jpg


Visitors welcome....double vaccination certificate only pls :D
Okay, just getting my double vaccination against upgraditis and coming soon !
Jokes aside, these speakers are what I ever heard with the most realistic presentation, given a good recording, the musicians are in the room with you, nothing else can beat that IMO, enjoy !
 
What are they like? I’ve been very drawn to them.
They really are spectacular, once you get (REW) the room correction software mastered they are breeze to setup. For example, I use the slightly amended version of the Harmon Curve from 20Hz to 250Hz, then its flat to 30KHz. They really do do 20Hz rather well too, no flabbly bloated bass, they simply play a full range sound from a rather small sealed cabinet.

What are your current speakers and system?
 
Finally received my silver clock. Its all a bit low-down because my pre-amp has gone back to Halcro in Oz for new relays / caps and a general do-over.
Using the DAC direct into the power amps and it sounds mighty fine.

IMG-6738.jpg


The rest of it

IMG-6740.jpg


Visitors welcome....double vaccination certificate only pls :D
I am still awed by how good the dCS Rossini and clock sound in my own system.
I've ended up with Nordost BNC cables between the two (Valhalla I on the 44kHz link and Tyr 2 on the 48kHz) and am pleased with the results. And they are both on a trio of Nordost Sort Kones.
 
Finally received my silver clock. Its all a bit low-down because my pre-amp has gone back to Halcro in Oz for new relays / caps and a general do-over.
Using the DAC direct into the power amps and it sounds mighty fine.

IMG-6738.jpg


The rest of it

IMG-6740.jpg


Visitors welcome....double vaccination certificate only pls :D


Colin

I think your system has to be numero uno on PFM, please can you let us know how you assembled it, and the iterations you went through?

Please can you comment on the digital source for the DCS and what power conditioning (if any) you are using?

I’m just booking a third dose, so please place me in the queue to audition- although it looks as though you are in some sort of prison?
 
I am still awed by how good the dCS Rossini and clock sound in my own system.
I've ended up with Nordost BNC cables between the two (Valhalla I on the 44kHz link and Tyr 2 on the 48kHz) and am pleased with the results. And they are both on a trio of Nordost Sort Kones.

I bought some designacable belden 75 ohm cables. Nothing fancier at this stage. I’d value your thoughts on the differences between the dCS stock clock cables and others.

As you can see, Naim Fraim on Townshend corners and black ravioli pads under the Rossini and Clock feet. The dCS combo is indeed remarkable and far better than any other streamer / DAC combo I’ve heard before.
 
Colin

I think your system has to be numero uno on PFM, please can you let us know how you assembled it, and the iterations you went through?

Please can you comment on the digital source for the DCS and what power conditioning (if any) you are using?

I’m just booking a third dose, so please place me in the queue to audition- although it looks as though you are in some sort of prison?

dCS source is Roon Rock with a Keces P8 power supply and music on a NAS and also an 8TB disk. Everything except the power amps runs off a 4KVA balanced output transformer routed through a Shunyata V-Ray conditioner. In addition a Franke Shunt Reactor is plugged in the mains ring to “stiffen” the power supply.

If I want to play a CD (a rare event) an ancient Pioneer stable platter CD player outputs digital to the DAC through 75 ohm cable.

The development of the system will have to wait, it’s late, but suffice to say I heard an full MBL 101 Extreme system at a friends when I was living in Kuala Lumpur, and was lost.
 
dCS source is Roon Rock with a Keces P8 power supply and music on a NAS and also an 8TB disk. Everything except the power amps runs off a 4KVA balanced output transformer routed through a Shunyata V-Ray conditioner. In addition a Franke Shunt Reactor is plugged in the mains ring to “stiffen” the power supply.

If I want to play a CD (a rare event) an ancient Pioneer stable platter CD player outputs digital to the DAC through 75 ohm cable.

The development of the system will have to wait, it’s late, but suffice to say I heard an full MBL 101 Extreme system at a friends when I was living in Kuala Lumpur, and was lost.

Given your investment, I wonder if you have tried a decent switch between the Rock and the DCS?
 
Finally received my silver clock. Its all a bit low-down because my pre-amp has gone back to Halcro in Oz for new relays / caps and a general do-over.
Using the DAC direct into the power amps and it sounds mighty fine.

IMG-6738.jpg


The rest of it

IMG-6740.jpg


Visitors welcome....double vaccination certificate only pls :D

Wow, a real dream system. I can only imagine how much your musical enjoyment must be! I have "baby MBLs" in the form of MC Audio RL21s and even they knock me out....... so these must be stunning.
 
Status
Not open for further replies.


advertisement


Back
Top