[WTD] SME M2-9R

[Amber Audio]

As per title, after a good condition, preferably boxed with accessories - SME M2-9R tonearm.

Am NE Scotland so would need to be posted.

Outside chance I'd consider a different arm but really want the S shaped detachable shell M2. Be fitting it to a 1200G/Ammonite or Lux 171.

Please PM.

ATB
Gus

 

[Amber Audio]

Bump

 

[divedeepdog]

I had an M-2, beautiful thing but the cost of headshells was eye watering, hold out for the R

 

[amazement]

I opted for a 309 as these are a bit thin on the ground, with ammonite on my GR.

 

[Amber Audio]

Still looking

 

[Knipester]

I know of a straight armed M2-9 that might be available

 

[early]

one from the " outside chance I'd consider a different arm " .

I have a Jelco TK950S ( S shaped detachable headshell with knife edge bearings ) along with a silver Ammonite armboard to suit a 1200G . If it is of any interest let me know .

 

[Amber Audio]

I know of a straight armed M2-9 that might be available

Thanks for replyinmg, I'll hold off for an S shaped

 

[Amber Audio]

one from the " outside chance I'd consider a different arm " .

I have a Jelco TK950S ( S shaped detachable headshell with knife edge bearings ) along with a silver Ammonite armboard to suit a 1200G . If it is of any interest let me know .

I'll keep it in mind - I have a 750D on the Lux 171 at the moment

 

[Beobloke]

*Nerd mode ON*

The M2-9R isn't S-shaped; it's J-shaped.

*Nerd mode OFF*