Roksan Nima Turntable interconnect options??

[John Lamb]

Hello to all you guys, is there a minimum length for a turntable interconnect from tonearm to phono stage??

I have a Roksan Nima tonearm

I only need a cable of around 500mm from the tonearm to my phono stage the turntable is on its own dedicated wall shelf with the phono stage on the right and below the turntable.

I have looked at the Roksan HDC 03A but it is only available in a 1.5m length any cable recommendations

Thank you all for advice so far it has been very helpful

 

[chartz]

No problem at all. Go ahead and grab the 150 cm.
Old MM cartridges can be capacitance sensitive, but nowadays about 150-200 pF is fine.
If you have an MC then it is even less of a problem!

 

[John Lamb]

Great I'm using a Benz Glider SL moving coil so that's good to know cheers

 

[Knipester]

Hello to all you guys, is there a minimum length for a turntable interconnect from tonearm to phono stage??

I have a Roksan Nima tonearm

I only need a cable of around 500mm from the tonearm to my phono stage the turntable is on its own dedicated wall shelf with the phono stage on the right and below the turntable.

I have looked at the Roksan HDC 03A but it is only available in a 1.5m length any cable recommendations

Thank you all for advice so far it has been very helpful

I have a 1.5m roksan hdc 03a cable for sale, along with a nima and TP skale. Drop me a pm if you are interested.