Panasonic volume pot?
- Thread starter Fatmarley
- Start date
quickie
pfm Member
Mat,
The fourth set of pins are just another pair commoned up with the ones next to them.
You can use either.Click on the link to see how I wired mine.
Paul
http://cgi.ebay.co.uk/ws/eBayISAPI....ndexURL=2&photoDisplayType=2#ebayphotohosting
The fourth set of pins are just another pair commoned up with the ones next to them.
You can use either.Click on the link to see how I wired mine.
Paul
http://cgi.ebay.co.uk/ws/eBayISAPI....ndexURL=2&photoDisplayType=2#ebayphotohosting
This site contains affiliate links for which pink fish media may be compensated.
Artioneer
tripath walker
>> I used a DACT stepped attenuator in an old 62 very successfully <<
Anyone who like to buy an Elma switch for a DIY jobbie can
buy direct from Elma UK but you must give the EXACT order code.
Suitable resistors eg Welwyn RC 55 C or high spec. Welwyn
RC 55 Y can be bought from CPC in Preston.
http://www.elma.ch/eu/products/rotary_components/
For the switch contact : Dave Middleton (Sales Engineer)
Elma Electronic UK Ltd.
Phone: +44 (0) 1329 289 100
Fax: +44 (0) 1329 289 101
Email: [email protected]
Anyone who like to buy an Elma switch for a DIY jobbie can
buy direct from Elma UK but you must give the EXACT order code.
Suitable resistors eg Welwyn RC 55 C or high spec. Welwyn
RC 55 Y can be bought from CPC in Preston.
http://www.elma.ch/eu/products/rotary_components/
For the switch contact : Dave Middleton (Sales Engineer)
Elma Electronic UK Ltd.
Phone: +44 (0) 1329 289 100
Fax: +44 (0) 1329 289 101
Email: [email protected]