seyles
Retired Child
Surplus to requirements, MiniDSP PWR-ICE DSP Plate Amplifier
2x125W @ 4Ω or 1 x 450W @ 4Ω DSP plate amplifier
Powered by ICEpower® 125ASX2 module
Ethernet control via Mac or Windows, FIR + IIR filters
Android & iOS app Array
High and low pass crossover per channel, lots of filter types and slopes
6 Band PEQ on each input and output
Compressor on each output
0 to 10ms delay on each output
4 on board configurations, can be saved / backed up to a computer
This is mounted in an adaptable PVC box with a Neutrik SpeakON NL4MPR 'speaker connector, making it very easy to use whilst prototyping etc.
I've factory reset and upgraded to the latest firmware; I can email the software, MiniDSP Support will let you have it for free, you need to just register on their website.
Looking for £200 plus postage cost (UK & NI only).
Software looks like this:
2x125W @ 4Ω or 1 x 450W @ 4Ω DSP plate amplifier
Powered by ICEpower® 125ASX2 module
Ethernet control via Mac or Windows, FIR + IIR filters
Android & iOS app Array
High and low pass crossover per channel, lots of filter types and slopes
6 Band PEQ on each input and output
Compressor on each output
0 to 10ms delay on each output
4 on board configurations, can be saved / backed up to a computer
This is mounted in an adaptable PVC box with a Neutrik SpeakON NL4MPR 'speaker connector, making it very easy to use whilst prototyping etc.
I've factory reset and upgraded to the latest firmware; I can email the software, MiniDSP Support will let you have it for free, you need to just register on their website.
Looking for £200 plus postage cost (UK & NI only).
Software looks like this: