teddy_pardo
Trade: Teddy Pardo
Can anyone tell what are the two trimmers VR1 and VR2 used for (I suspect for getting 0V at the output), and how exactly to set them.
Also, are there any "improved" Kaneda designs? I believe that it can be improved by replacing the LTP resistors by current sources, as well as the 4.7K resistor at the emitter of the output transistor. Obviously good voltage regulators will help too...
Also, are there any "improved" Kaneda designs? I believe that it can be improved by replacing the LTP resistors by current sources, as well as the 4.7K resistor at the emitter of the output transistor. Obviously good voltage regulators will help too...