Hana SL Rega RB300

[Conster]

Does anyone know the proper shim height for this combo.

 

[daren_p]

I recently had a Hana SL installed on my RP6 & the dealer used a 2mm shim. Have read 2-3mm being used online.

 

[Conster]

Ok. Using a dynavector 10x5 currently with 4mm of shims (2x2mm shims) so might just try that first and go from there

 

[Rockmeister]

Despite Rega's view that VTA is unimportant, they do actually make a collar for the arm base, quite cheap. I think that there is less chance of resonance that way, and easier adjustment. Looh here for example. Seems a bit of a bargain?
https://www.ebay.co.uk/p/?iid=39148...0&device=c&campaignid=707291931&crdt=0&chn=ps

 

[Cyreg]

Also depends on what turntable the RB300 is mounted? ;-)

If RB300 than 1-centerpillar armbase instead of 3-point connection

http://www.rega.co.uk/rb300-spacer-2mm-shim.html

http://www.rega.co.uk/sleeved-arm-nut.html (at more than 4mm shims)

https://www.vinylengine.com/turntable_forum/viewtopic.php?f=19&t=92778

 

[Conster]

Also depends on what turntable the RB300 is mounted? ;-)

A systemdek