Dynavector P75 Mk3 And Pro-ject Phono RS

[Mr Magoo]

I’ve been reading some very positive things about the Pro-Ject Phono RS which retails at a similar price to the Dynavector (now in Mk4 guise). Has anyone compared the Pro-ject to the Mk3 Dynavector. I’m interested in the Pro-Ject as there is an upgrade available in the form of a bespoke power supply. Has anyone any experience of the Pro-Ject with the PS?

My cart is the Dynavector 17D3 on a Versalex.

Many thanks
Peter

 

[Mr Magoo]

Anyone with any experience of the Pro-Ject Phono RS?

 

[Erocka2000]

Haven't heard the Phono RS, but the P75 is a no-brainer if you have a Dynavector cart, especially in Dr. T mode. Had a mk. 3 that I used with a 20x2L and XX2 mk. 2 to great effect.

 

[Oakwood]

Haven't heard the Phono RS, but the P75 is a no-brainer if you have a Dynavector cart, especially in Dr. T mode. Had a mk. 3 that I used with a 20x2L and XX2 mk. 2 to great effect.

This, any of the P75 variants in Dr T mode with a Dynavector MC is a great match.

 

[Jimbobbyron]

Just got a Dynavector 20x2L to replace a cheap AT95 which I am using with a P75 mk2. First time listening with the Dr T mode. It sounds great I'm a happy chappy!

This, any of the P75 variants in Dr T mode with a Dynavector MC is a great match.

 

[Mr Magoo]

Thanks for the comments on the P75. How is the P75 Mk3 set to DrT mode?
Thank
Peter

Anyone with experience of the Pre-Ject Phono RS?

 

[Erocka2000]

You just have to re-arrange the jumpers on the inside. All the different configurations are in the manual. You can even specify the the type of impedance in Dr. T mode on the mk.3. It's very easy to do.

 

[Mr Magoo]

Many thanks.