advertisement


Audio Technica ATP-12T

slammed56

slammed56

pfm Member
Anyone on here using ATP-12T with a SPU ?
I’m struggling to get the Azimuth bang on
I’ve been given some advice that the 2 tiny screws at the end of the wand might be for this adjustment but the guy is using the AT 1503 arm and not the ATP-12, I’ve attempted to loosen these to see if I can get any movement but one screw is being a PITA to budge it and I don’t want to strip it
Any advice would be much appreciated
 
Put those tiny screws back.
Do you see those threaded adjusters under the 3 mounting screws in the base?
 
Then you have a bit of a problem. There should be threaded inserts in there which give you the adjustment. They must have been lost. I can't imagine you will be able to get any new ones. You will need to get some made up. Find right size bolts and drill through.
Do a Google search for images to see what is missing.
https://www.vinylengine.com/
You can download a handbook and see what you need to make. It's not too difficult, shouldn't cost a lot if you have to pay someone.
Same fittings can be seen on AT1503, clearly seen in handbook.
I can do you a photo if you need it.
 
Thank you Jowcol, makes perfect sense now and I have now found good pics of what I need to make
There’s also some pics of the arm mounted without these adjustment screws so I’m guessing these must be shimmed
Hopefully I’ll have something that I can adapt so I can get it up and running
 
You must log in or register to reply here.


advertisement


Back
Top