lp12

Due to unforeseen circumstances, I'm looking to sell my LP12. It was built by Peter at Cymbiosis in Dec 2023. The spec is as follows: - Walnut plinth - Cirkus bearing - Majik sub-chassis - Ittok tonearm - Audio Technica AT-VM95SH cartridge - Lingo 3 external power supply Condition is superb...

A very long shot, but I am on the hunt for a kit either complete (preferable) or just the subplatter, bearing assembly and oil. Must be in very good condition. DM if you have one you are prepared to sell. Many thanks Simon

Hello. LP12 newbie here! I purchased this to go with my retro set up (Nait 2 and Kans). I just picked up a LP12 (1979-1981) with a Mission 774 arm and Grado F-1+ cartridge. Doing some research the 774 seems like a well respected arm that pairs well with the LP12 so I thought I’d give it a...

Hi guys I try and spend my money as effectively as possible. The world of LP12’s however seems to be endless. But I do aspire to own one in the coming months. I know full well, as with anything, the more money you spend, the less impact each pound has. A budget Ferrari, at the end of the day...

I recently upgraded my LP12 and whilst it brought some improvements, it also went downhill in other areas. I am a musician and producer, but it has only been in the last 6 months that I've had a home system that really brought recorded music to life. So I'm experienced with audio (studio and...

Selling for a friend. A very tidy LP12. Black Ash, non-fluted plinth. Lingo 1 PSU, Ekos 1 tonearm and Adikt cartridge. The LP12 has serial number 69*** which is ‘85 to ‘87. The Ekos has serial number 8**** and the Lingo has serial number 012*** it was lovingly checked by Brenda Coyle! The...

Selling on my much loved Avondale TAPS LP12 PSU. Years ago I built a crude copy of the cct, which worked pretty well. About five years ago I picked up this example with a more complex cct and a certainly an improvement in audio sq. Tested and re-built by Les back in 2018, new switch, new...

Having dusted off my aged Planar 3, after some use the speed varied. I assume either the belt needs adjustment, or a new motor is needed. It’s got a 3pin plug and original silver coloured rca connectors. Condition is good. That’s got me thinking about options, but having little knowledge of TTs...

I currently run a high-end (Aro, Keel, Krystal, Radikal) LP 12 - happy man. However I play a lot of mono jazz records and have heard many times that to do them justice I need a mono cartridge - not easy to swap out cartridges on a Aro. About two weeks ago I literally found in someone’s garbage...

I'm based in East cheshire, ( so also close to Derbyshire and Staffordshire and 20 miles south of manchester ). Need a good reccomendation on a not too distant expert who can set my LP12 up, I've also picked up 2018 cirkus bearing that I would like fitted etc Answers on a postcard ( or you...

We are having a change around with our LP12s and have the following available Ex-demo Full Majik LP12 with Oak plinth and Cirkus bearing. £2250. (RRP £2999) Radikal PSU in machined case. £3499 inc fitting. Perfect boxed condition in black (RRP£5100) Ekos SE £2999 inc fitting. Perfect boxed...

I have had my Rega P3 for nearly forty years - it still has the original (straight) arm, and I'm pretty sure the R100 cartridge is original too. Apart from a couple of stylus replacements it has not been upgraded or serviced at all. Once we've moved house next month I was planning to replace the...

Can someone tell me if there was a Kore made for the ARO? Seen many for Linn arms, but no ARO - or is there a modification that can be done to mount?

I posted a while back here, about some noise issues I was experiencing with the LP12/Kore/Audiomods turntable I have in the 2nd system in the office upstairs. One of the problems was my poor grounding arrangement in the tone arm, that I originally wired myself. Some time passed before I had...

I was just reading about this on the Collaro site. I vaguely remember reading about it before, but never took much notice. Similarly things like the felt mat being one way up or the other and the belt too. Anyone tried this stuff and did it make any difference? My tonearm's away for a rewire...