I have a pair of these speakers in good condition. I have noticed over the last few years a decline in both quantity and quality of the treble. I have replaced the tweeters and need to replace/upgrade the capacitors in the crossover. They are 6mfd xp and xpp polypropylene caps. Firstly which...
Hi,
I was recently after the Goodman's Magnum K and Magnum K2 crossovers and was really surprised not to find them floating around on the net. My tracing skills were poorer than I thought they were so I got a little help from chrisng over at DIY audio. I can see from a quick google that these...
Ello folks. Myself and @rdale from Hifiwigwam were comparing Tannoy Autograph Mini crossover schematics and found out the crossovers are looking different, presumably because the person whose schematics I found were for the Prestige edition, while rdale's are for the original Autograph Mini...
I need to limit the frequency to my stereo speakers at >= 80Hz in a 2.1 setup but I can’t use an AVR and my SVS sub does not have a high pass filter for the high level outputs so looking for other solutions.
Ideally the solution would utilise as simple a signal path as possible, all in the...
Hello and happy new year!
I’ve got myself some Goodmans Magnum K2 and am looking for some advice in getting them sounding top please.
I’ve recapped crossovers before, replaced electors for polys where applicable, but I get the impression that these speakers have polys in there anyway? Does...
I am looking for a type 24 crossover pair for Jim Rogers JR 149 speakers. I actually have one pair of JR 149 that I use the type 24 crossover on and I preferred it to the original crossover when I changed it. I recently bought another pair and the speakers show a lot of promise stacked (tweeter...
Hi all,
Does anyone have or can get hold of the crossover schematics for the above or even for the Neutron IV's?
I want to do some tweaking replacing the ALCAP electrolytics for some better quality Polys to get more from these lovely drivers. This may include upgrading the spec to neutron...
I'm in the process of developing an active crossover with the built-in ability to change the frequencies by the user. It would be both 2 and 3-way capable. I'm interested in feedback on what the most useful frequencies are, particularly for the woofer-to-midrange of a 3-way system.
My...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.