Syrinx PU3 - Finger Lift and Cue Bar

[Highlander]

This is a real long shot.....

It's a long story but the finger lift arm and cue bar from my beloved PU3 have gone missing. Johnny at Audio Origami doesn't have any spares and I was hoping that someone on here has an old beater of a PU3 who would be prepared to sell/donate to me cue bar and finger lift for the raise lower mechanism (not the arm finger lift at the front if that makes sense!).

 

[Highlander]

Through an even longer story than how they went missing in the first place, I now have a cue arm and finger lift and a fully functional PU3 again. Miracles do happen!

 

[Bob McC]

Result!
Take care.
My PU3 had a tendency to come apart too.

 

[Highlander]

Result!
Take care.
My PU3 had a tendency to come apart too.

Apparently those parts were designed to easily dismantled and the instructions (if a double sided sheet of A4 can described as instructions) do instruct you to remove them for shipping. Scott Strachan and team appear to have implemented the “easy” part too well at times!

All’s well that ends well!