Not much but you could make it work on record by introducing a sold state line driver such as this.
https://artproaudio.com/product/cleanbox-pro-dual-channel-level-converter/#specs
I also have a xindak xa3200 mk11 would that be ok
Thanks for your advise great to get such quick answers too.I think I need to just figure a way to move the reel to reel .
I do use a Denon av2000 which has line in and out would this maybe do it if I fed it to that from the amp and then the reel to reel
I also have a xindak xa3200 mk11 would that be ok
I'm confused now because Jez's answer to my question in this thread implied that there should be no HF rolloff in the audible band when using a 5m long interconnect compared to a 1m interconnect with an active SS pre. I measured a very tiny amount of HF rolloff when I connected the line out of my Yamaha A-S3000 integrated (which I assume is unbuffered) to a Focusrite 4i4 ADC using a 5m interconnect instead of a 1m interconnect. It was only a couple of tenths of a dB at 20kHz though so would likely be inaudible to all but those with golden ears.