Using an external headphone amp With a Nac preamp

[lazyscott1]

Hi, i need a bit of advice from experienced naim users. I have a 32.5 pre and want to use an external headphone amp (not naim). I have 729 boards fitted but no 324 boards. Do i need the 324 boards to use the tape out part of the tape input or will the 729 boards suffice- or can i just use link wires on the pins where a 324 board would have been fitted. ( i hope this all makes sense!!)
Regards
Leo

 

[Matty297]

What’s your source?
I would just use a Y-Splitter from the source.

 

[lazyscott1]

Hi Marty, i use both a t/t and streamer. So as i understand i can use the tape out to feed a headphone amp.
Leo