Recent content by The_JJ

Yep, MJS, SJM, JJ - me, SJP, JLC, MJ. Quite a few more Js who didn't sign boards

I can get some professionally 3D printed if you are interested

Mono 135 cables was something Naim staff were using in their own systems before it became a product. The choice of cable was somewhat determined by the early preamp output/gain stage (NA321) not being great at driving. Later NA321 stages had a Miller capacitor added, which helped a lot too. Many...

I still have some, what do you need

IRC the second rail powers the 321 boards and LED. You will need to cut some tracks to achieve this, the 5 pin link plug is the usual way to make them backwards compatible. A more permanent reversal would require relinking the cut tracks on the PCB

I have spare original boards for a 110 if you need replacements.

I don't have the one you need, they are made by EAO they are alarmingly expensive. The closest I found looking today for the older type is this one. https://uk.farnell.com/eao/31-262-0252/switch-2no-2nc-maintained/dp/3112111 This will not include the coloured lens, diffuser or bulb

Small flat blade screwdriver for the knob. The grub screw can split so don't force it

I will have a look

Take it to a powder coater, they will be able to match the finish

I had a few Kendeil 22000/63 to sell but I am not allowed to advertise here until I until I hit the post count threshold.

Off the top of my head 6x 10/35 tant 6x 47/6 tant or 47/10 4x 10/63 axial with a bit of ESR 4x 47/35 axial it's across a 10v zener so 35v more than enough 4x 3K3 2 watt if the old ones are cooked 15000/63 or 22000/63 Kendeil

I been looking a rectangular backlight that is close enough to the right size, no luck so far

The tantalums are 10uF 35v and can be gotten from most suppliers, the large electrolitics are a little bit more difficult

I'll see you all Saturday